Display points

Vectornaut commented

2024-12-04 20:10:07 +00:00

Member

Show points in the Display view.

Styling

Emphasize that a point has no part. For example:
- No partial occlusion, even when the point representation (presumably disk or sphere) is only partially shaded by a surface
A point that lies on a positive-codimension entity is never occluded by its neighborhood in that entity (but might be occluded by some region of that entity not containing it, such as a point on the "back" hemisphere of a sphere being occluded by its "front" hemisphere).
Maybe a point that's constrained to be on a surface should be flattened onto the surface? (Likely this would be a later experimental refinement of the visual representation.)

Labeling

Label always has the same apparent occlusion as the point.
- In particular, when a point lies on a positive-codimension entity, its label is never occluded by its neighborhood in that entity. This is a corollary of (4) and (2).
Label stays in the same screen orientation and position, relative to the point, under most or all rotations.
- Labels are always "upright" for reading in the display, unless explicitly customized on a per-point basis or generically. (Such angled label text can be a later enhancement.)
- Maybe it would be okay for the label's screen orientation to roll when the camera rolls (respecting previous bullet).
- Ultimately the apparent relationship of label to point should be customizable (e.g. by dragging the label, but perhaps in other ways, such as a selection of placement algorithms) on a per-point basis, falling back to a (potentially customizable) general default.

Show points in the `Display` view. ### Styling 1. Emphasize that a point has no part. For example: - No partial occlusion, even when the point representation (presumably disk or sphere) is only partially shaded by a surface 2. A point that lies on a positive-codimension entity is never occluded by its neighborhood in that entity (but might be occluded by some region of that entity not containing it, such as a point on the "back" hemisphere of a sphere being occluded by its "front" hemisphere). 3. Maybe a point that's constrained to be on a surface should be flattened onto the surface? (Likely this would be a later experimental refinement of the visual representation.) ### Labeling 4. Label always has the same apparent occlusion as the point. - In particular, when a point lies on a positive-codimension entity, its label is never occluded by its neighborhood in that entity. This is a corollary of (4) and (2). 5. Label stays in the same screen orientation and position, relative to the point, under most or all rotations. - Labels are always "upright" for reading in the display, unless explicitly customized on a per-point basis or generically. (Such angled label text can be a later enhancement.) - Maybe it would be okay for the label's screen orientation to roll when the camera rolls (respecting previous bullet). - Ultimately the apparent relationship of label to point should be customizable (e.g. by dragging the label, but perhaps in other ways, such as a selection of placement algorithms) on a per-point basis, falling back to a (potentially customizable) general default.

Vectornaut added reference main

2024-12-04 20:10:21 +00:00

Vectornaut removed reference main

2024-12-04 20:10:24 +00:00

Vectornaut added the

enhancement

label 2024-12-04 20:10:42 +00:00

glen commented

2024-12-04 21:25:16 +00:00

Owner

Note that a first PR would presumably only implement the core of the features listed above; its merge should be accompanied by filing issues with the remaining desired features and resolving this overall one.

glen commented

2024-12-04 21:56:52 +00:00

Owner

Are points already fully supported in the Assembly and Engine? If not, it would seem that issues for such support should be filed now, and at least the Assembly one should be a prerequisite of this one.

Vectornaut added this to the Demo project 2025-02-11 00:25:16 +00:00

Vectornaut added a new dependency 2025-03-12 18:59:48 +00:00

#74 Set up a tetrahedron radius ratio demo

glen referenced this issue

2025-03-12 22:44:17 +00:00

Better-looking point #3

glen added a new dependency 2025-03-12 22:54:21 +00:00

#4 Draggable point

Vectornaut referenced this issue

2025-04-09 23:00:04 +00:00

Curvature regulators #80

glen referenced this issue

2025-04-10 22:50:30 +00:00

Curvature regulators #80

Vectornaut referenced this issue

2025-04-10 22:54:56 +00:00

Curvature regulators #80

Vectornaut was assigned by glen

2025-04-21 23:42:28 +00:00

Vectornaut referenced this issue

2025-04-28 19:54:27 +00:00

Points #82

Vectornaut modified the project from Demo to Alpha

2025-05-06 05:51:59 +00:00

Vectornaut referenced this issue

2025-06-20 20:51:48 +00:00

Occlude points #93

Vectornaut referenced this issue

2025-06-20 20:58:59 +00:00

Label points #94

Vectornaut referenced this issue

2025-06-20 21:06:36 +00:00

Flatten points onto surfaces #95

Vectornaut commented

2025-06-20 21:12:22 +00:00

Author

Member

Note that a first PR would presumably only implement the core of the features listed above; its merge should be accompanied by filing issues with the remaining desired features and resolving this overall one.

Pull request #82 has addressed the core of this issue by adding a bare-bones display that draws points in an arbitrary order over the rest of the scene. The rest of the desired features described in this issue have been broken out into issues #93, #94, #95.

> Note that a first PR would presumably only implement the core of the features listed above; its merge should be accompanied by filing issues with the remaining desired features and resolving this overall one. Pull request #82 has addressed the core of this issue by adding a bare-bones display that draws points in an arbitrary order over the rest of the scene. The rest of the desired features described in this issue have been broken out into issues #93, #94, #95.

Vectornaut closed this issue

2025-06-20 21:12:22 +00:00

Rows
Columns

Display points #27

Styling

Labeling