NEWS

@@ -6,6 +6,13 @@ The changes compared to 2.3.0 are:
 o Added examples updating the life simulation to illustrate the color and
   computed style features.
 o You can compute the styles for cells, with an additional expression per cell.
+o Computation of current values for cells without clocked expressions now
+  always depends on contemporaneous current values rather than prior values,
+  even when the sheet is clocked. This means, for example, an entry whose base
+  value is the sum of a column and which has no will always resolve to the
+  current sum of that column, even if the column contains clocked values.
+  (This is a breaking change in that prior to this modification, such a cell
+  when clocked would contain the sum of the prior values in that column.)
 o New token types: style and bool.
 o Comparison operators return bool rather than int (Note this can be a breaking
   change; you may need to wrap comparisons in int() if you are using the result
@@ -21,8 +28,13 @@ o Addition of hexact float format, which allows for exact round trips to ASCII
 o New token type: funcall (which basically amounts to an expression). This
   allows parsed rather than unparsed expressions to be stored in cells, and
   allows macros which receive their arguments unevaluated.
-o sum(), min(), and max() can now operate over their list of arguments as well
+o New region/accumulator operation count() that counts truthy cells (rather
-  as over a block.
+  that just nonempty cells as n() does) added.
+o All region/accumulator operations including sum(), min(), and max() can
+  now operate over their list of arguments as well as over a block.
+o All region/accumulator operations can take an optional expression when
+  operating over a block that generates the values to be accumulated (rather
+  than just taking the values directly from the block).
 o Added floor(), ceil(), trunc(), and round() functions for finding integers
   associated with doubles, eliminating (note possible breaking change) the
   int conversion with two rounding directions.

doc/teapot.lyx

@@ -346,7 +346,7 @@ name "fig:Three-Dimensional-Spread-Sheet"
 
 \end_inset
 
-Three-Dimensional Spread Sheet Layout
+Three-Dimensional Spreadsheet Layout
 \end_layout
 
 \end_inset
@@ -794,7 +794,7 @@ The sheet is currently in reset condition and the result is 1.
 
 \begin_layout Standard
 After this introductory chapter, you should be familiar with the basic concepts
- in spread sheets.
+ in spreadsheets.
  The next chapters explain all operations available in detail.
  You should read them to get an overview of the possibilities offered by
  
@@ -4595,7 +4595,7 @@ CSV (.csv)
 \begin_layout Standard
 CSV (comma separated value) files only contain the data, not the expressions
  calculating it.
- Many spread sheets can generate this file format and many graphics programs
+ Many spreadsheets can generate this file format and many graphics programs
  like gnuplot(1) can read it.
  The field separator usually is a tab or comma, strings may be enclosed
  in double quotes and decimal numbers have a dot to mark the fractional
@@ -5315,34 +5315,170 @@ goto
 5.12.4
 \emph default
 .
- 
 \end_layout
 
 \begin_layout Section
-Expressions
+Sheets, Cells, and Clocking
 \end_layout
 
 \begin_layout Standard
-Cells consist of a base (reset) expression, a clocked expression, a style
+A 
- expression, and a current value.
+\emph on
- If the sheet is currently in the reset state (the default), all cells display
+sheet
- their base value as current value.
+\emph default
+ is a three-dimensional collection of 
+\emph on
+cells
+\emph default
+.
+ The slices in the X, Y, and Z directions are called the 
+\emph on
+columns
+\emph default
+, 
+\emph on
+rows
+\emph default
+, and 
+\emph on
+layers
+\emph default
+, respectively.
+ At any given time, the valid coordinates for a sheet are all non-negative
+ integers up to some current limit in each of the X, Y, and Z directions,
+ which may be different in each direction.
+ Generally speaking, direct references to cells with negative coordinates
+ are an error, whereas indirect references to cells with negative coordinates
+ and all references to cells with coordinates beyond the current limits
+ act as references to empty cells with all default attributes/styles.
 \end_layout
 
 \begin_layout Standard
-When the sheet is clocked (see Table 
+Each cell has three expressions, all of which are optional: a base (reset)
+ expression, a clocked expression, and a style expression.
+ It also has an associated current value.
+ See section 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Expressions"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+ for the semantics of expressions and values.
+ When the sheet is in the reset state (the default/initial state), all cells
+ set their current values to the value of their base expression; references
+ to other cells use those other cells' current values.
+ The recomputation of current values updates referred-to cells first in
+ an effort to produce the expected, correct values.
+ However, if there are circular references among cells, this update process
+ does not attempt to produce a fully self-consistent state, in that a given
+ cell is only updated once.
+ Hence the resulting current values can depend on the order updates occur,
+ and it may happen that a cell's current value is not equal to the value
+ of its base expression computed with current values of all cells.
+ This behavior may seem problematic, but in fact it's not always possible
+ to produce a self-consistent state.
+ The simplest example is if the base expression for the cell with coordinates
+ (0,0,0) is @(0,0,0)+1, since no number is one more than itself.
+ Moreover, in the absence of circular reference chains among the base expression
+s, the recomputation of current values is guaranteed to reach a consistent
+ state for all cells.
+ The bottom line is that although circular references in base expressions
+ are not disallowed, their utility may be limited because their behavior
+ is relatively unpredictable.
+\end_layout
+
+\begin_layout Standard
+When a sheet is clocked (see Table 
 \begin_inset CommandInset ref
 LatexCommand ref
 reference "tab:Key-Bindings-in"
 
 \end_inset
 
-), the clocked expression is evaluated, using the current value of referenced
+), every cell with a clocked expression is clocked.
- cells.
+ When a cell is clocked (either because the sheet was clocked or by virtue
- The new current value is the result of that evaluation.
+ of the clock() function documented in section 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:All-other-functions"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+), its clocked expression is evaluated using the current value of all cells
+ referenced directly or indirectly, including cells that are also currently
+ being clocked.
+ Then the new current value of (all of the) clocked cell(s) is set to the
+ result of that evaluation.
+ Finally, the current values of the unclocked cells (which include any cells
+ that have no clocked expression) are recomputed based on the new current
+ values.
+ The upshot of these rules is that one can control the updating of potentially
+ circular references precisely: the computation of clocked expressions always
+ uses values of all cells, including other clocked cells, from the previous
+ 
+\begin_inset Quotes eld
+\end_inset
+
+tick
+\begin_inset Quotes erd
+\end_inset
+
+, and the computation of base expressions uses values of all cells, including
+ other unclocked cells, from the current tick.
+\end_layout
+
+\begin_layout Standard
+Finally, whenever the style of a given cell is needed, for example to display
+ the cell, its style expression is evaluated based on the current values
+ of all cells to which it refers directly or indirectly.
+ The expression must evaluate to a style value (see subsection 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Data-Types"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+) and that value provides the style of the cell.
+\end_layout
+
+\begin_layout Section
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Expressions"
+
+\end_inset
+
+Expressions and values
+\end_layout
+
+\begin_layout Standard
+In 
+\noun on
+teapot
+\noun default
+, values are specific data items and expressions are the formulas that can
+ be evaluated to produce those values.
+ This section describes the possible values, the allowed syntax of expressions,
+ and the semantics of valid expressions.
 \end_layout
 
 \begin_layout Subsection
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Data-Types"
+
+\end_inset
+
 Data Types
 \end_layout
 
@@ -6996,6 +7132,12 @@ sum Returns the sum of the accumulated values (recall for strings this is
 \end_layout
 
 \begin_layout Subsubsection
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:All-other-functions"
+
+\end_inset
+
 All other functions
 \end_layout
 
@@ -10123,7 +10265,7 @@ How do I hide intermediate results?
 \end_layout
 
 \begin_layout Standard
-If you used flat, two-dimensional spread sheets before, you are probably
+If you used flat, two-dimensional spreadsheets before, you are probably
  used to hidden cells which contain intermediate results, global constants,
  scratch areas and the like.
  

src/common/cell.c

@@ -50,6 +50,11 @@ Token gettok(const Cell *cell, TokVariety v)
   return cell->tok[v];
 }
 
+/* iterable      -- does cell have iteration content? */
+bool iterable(const Cell* cell) {
+  return (cell != NULLCELL) && cell->tok[ITER_CONT].type != EMPTY;
+}
+
 /* locked        -- is cell locked? */
 bool locked(const Cell *cell)
 {

src/common/cell.h

@@ -32,6 +32,7 @@ typedef struct
 typedef enum {ALTER_LABEL, PRESERVE_LABEL} LabelHandling;
 
 Token gettok(const Cell *cell, TokVariety v);
+bool iterable(const Cell *cell);
 bool locked(const Cell *cell);
 bool ignored(const Cell *cell);
 const char *getlabel(const Cell *cell);

src/common/sheet.c

@@ -692,14 +692,33 @@ void update(Sheet *sheet)
       upd_clock = true;
       recompvalue(sheet, w);
     }
+    bool current_changed = false;
     for (ALL_CELLS_IN_SHEET(sheet,i,cell))
     {
       if (cell && cell->clock_resolving)
       {
         tfree(&(cell->tok[CURR_VAL]));
         cell->tok[CURR_VAL] = cell->tok[RES_VAL];;
-	cell->tok[RES_VAL].type = EMPTY;
+        cell->tok[RES_VAL].type = EMPTY;
-        cell->clock_resolving = false;
+        current_changed = true;
+      }
+    }
+    if (current_changed) {
+      /* Recompute all of the non-clocked cells so that they get the values
+         of the newly-changed clocked cells
+      */
+      for (ALL_CELLS_IN_SHEET(sheet, i, cell)) {
+        if (cell) {
+          if (cell->clock_resolving) {
+            cell->clock_resolving = false;
+          } else {
+            cell->updated = false;
+          }
+        }
+      }
+      for (ALL_LOCS_IN_SHEET(sheet, w)) {
+        upd_clock = true;
+        recompvalue(sheet, w);
       }
     }
     upd_clock = false;
@@ -905,10 +924,11 @@ void clk(Sheet *sheet, const Location at)
 {
   assert(sheet != (Sheet*)0);
   assert(IN_OCTANT(at));
-  assert(LOC_WITHIN(sheet,at));
+  assert(LOC_WITHIN(sheet, at));
-  if (CELL_AT(sheet,at))
+  Cell* toclock = CELL_AT(sheet, at);
+  if (iterable(toclock))
   {
-    CELL_AT(sheet,at)->clock_requested = true;
+    toclock->clock_requested = true;
     sheet->clk = true;
   }
 }