glen/loops
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Loops3.4.0
loops/etc/convert.pl

2193 lines
77 KiB
Perl
Raw Permalink Normal View History

Copy of LOOPS 3.3.0
2017-10-16 19:43:09 +00:00
#!/usr/bin/perl -w
#
# Script to convert GAP manual TeX files to HTML
# Usage:
# convert.pl [-csti] [-f <frontpage>] [-n <sharepkg>] <doc-dir> [<html-dir>]
#
# Requirements: Perl (might need to edit the first line of this file)
# TtH is not strictlty necessary but very desirable to treat
# formulas.
#
# Caveats:
#
# 1. This script assumes that the .toc, .lab and .bbl files are up-to-date
# with the .tex files and will almost certainly fail horribly if they
# are not.
#
# 2. The output files are CxxxSxxx.htm, (not .html) plus chapters.htm,
# theindex.htm and biblio.htm, except when called with the -c option
# (in which case, there are CHAPxxx.htm files instead of CxxxSxxx.htm).
# A (front page) file index.htm is assumed, but not created.
# Not all servers will serve .htm files as HTML without adjustments.
#
# 3. The script assumes that the .tex files comply with GAP conventions,
# including unwritten ones. It tries to follow the behaviour of TeX
# assuming those conventions. The on-line browser attempts to provide
# an ASCII equivalent. See BUGS.
#
# 4. The hierarchy of the HTML manuals assumed is of the following form:
#
# <GAPDIR>/
# doc/
# htm/
# <main>
# pkg/
# <pkg>/
# htm
#
# for each main manual <main> (in: ref, ext, tut, prg, new) and each
# share package <pkg>. To make inter-linking between manuals work,
# one should generally use the -c option for everything, (or not use
# it for everything). Linking to share package manuals from the main
# manual can only be expected to work if the share package manuals
# are created using this converter.
#
# 5. Only the manual.lab files for books that are referenced via the
# \UseReferences and \UseGapDocReferences commands in the manual.tex
# file of the book being converted (and the book's own manual.lab
# file, of course) are read. Make sure all the \UseReferences and
# \UseGapDocReferences commands needed are present! (The TeX-produced
# manuals will be missing lots of cross-references also, if some are
# missing.) You will get `Bad link' messages if you have some missing.
#
# Options:
#
# -c file-per-chapter mode: Generates one HTML file CHAPxxx.htm
# for each chapter; sections are level 2 headings and anchors
# CHAPxxx.htm#SECTxxx.
# This is intended for local browsing, especially under MS-DOS.
# It may be used with the -n (share package) option.
#
# -f <frontpage>
# Adds a "Top" link to link <frontpage> to each manual page,
# only available if -n option is also used.
#
# -s silent running: Conversational messages are suppressed.
#
# -n <sharepkg>
# We are not building the main manual but the one for the share
# package <sharepkg>. To get cross references to the main library
# right, it assumes that the share package is in the right place.
# The -c option may be used with this option.
#
# -i index: Only one index file is produced.
#
# -t tex-math: Runs `tth' (which must be installed on the local system)
# to produce better HTML code for formulae. (It would be possible to
# replace tth by another conversion, for example TeXexplorer, but
# (at least) the line calling `tth' would need to be modified.)
# -u Like -t, but uses `tth -u1' to produce unicode.
#
# <doc-dir> The directory where all the needed .tex, .toc, .lab and .bbl
# files are located.
#
# <html-dir> The directory (which should already exist) in which to put
# the generated .htm files. Defaults to the current directory,
# if omitted.
#
# Example usage:
# convert.pl -n mypkg doc htm # in directory .../pkg/mypkg
# convert.pl -t -n mypkg doc htm # ditto previous + use tth for maths
# convert.pl -t -n mypkg -c doc htm # ditto previous + 1 file per chapter
# convert.pl -t -c ../ref ref # (for Ref manual) in dir .../doc/htm
#
# FEATURES (and intended departures from the TeX behaviour)
# . Now interprets 2nd argument of an \atindex command if it is
# of form @... and ignores the first argument, or otherwise it
# interprets the first argument. Interprets ! as a comma and
# indices output have no sub-headers.
# . The @... component of \> commands is ignored. The assumption
# is that for: \>`...'{...}@{...} the @{...} component is just
# the {...} with font changes.
# . In a \beginitems ... \enditems environment everything is indented
# except for the item headers, rather than just the paragraph
# following the item header.
# . By default, the \beginlist ... \endlist environment is interpreted
# as a compact description list. By adding %unordered or %ordered...
# markup it will be interpreted as either an unordered or ordered
# list respectively (see the ext manual for details).
# . There are spacing differences e.g. \begintt ... \endtt etc.
# environments are not indented.
# . Supports all accents of TeX, in probably the best way currently
# possible with HTML.
# . Treats PseudoInput chapters in the `same' way as Input chapters.
# . With -t switch announces the version of TtH used.
# . Now supports %display{nontex}, %display{nontext} and
# %display{nonhtml} variants of %display environment.
# . References to subsections are now interpreted as one would expect.
#
# BUGS (and known departures from the TeX behaviour)
# . $a.b$ is only interpreted correctly in -t mode.
# . The citation keys that appear are the .bib file keys rather
# than the keys BibTeX constructs with the `alpha' bib-style.
#
# TODO
# . Refine macro_replace subroutine so it can also be used to purge
# 2nd arg of \atindex macros.
# . For -t mode, scan for \def commands in manual.tex and write
# to TTHIN (tthmacros.tex). Should we only look for a block
# demarcated by %mathsmacros ... %endmathsmacros ?
# These \def commands are only intended for such font
# changing commands as: \def\B{{\cal B}} (`tth' provides a
# script-type font).
# . Provide a table environment, if/when a \begintable ...
# \endtable environment is added to gapmacro.tex.
#
#############################################################################
# Check PERL version
#
$] > 5 or die "Needs perl 5";
use Getopt::Std;
#
# Global variables
#
# $dir -- the full pathname of the input directory, including a trailing /
# $odir -- the full pathname of the output directory, including a trailing /
# $opt_c and $opt_s set by getopts()
# @chapters -- the chapters data structure
# IN -- the current input file (outputfiles are handled by select)
# $footer -- the trailer put on every page
# $indexcount -- used within chapters to number the index anchors
# $lastnumchap -- number of last numerically numbered chapter
#
# These match chapter and section lines in a .toc file
#
$chapexp = '\\\\chapcontents\s+\{((?:\d+|[A-Z]))\}\s*\{(.+)\}\s*\{\d+\}';
$secexp = '\\\\seccontents\s+\{((?:\d+|[A-Z]))\.(\d+)\}\s*\{(.+)\}\s*\{\d+\}';
#$ignoreexp = '\\\\tocstrut|\\\\appno|\\\\seccontents\s+\{\d+\}';
$lastnumchap = 0;
# Variable that is set to 2 inside a nest of \itemitem s of a
# \beginlist ... \endlist environment
#
$listdepth = 0;
# This is augmented each time a line: \Package{...} is read in a manual.tex
# file, so that macro_replace knows to set a {\...} macro in sans-serif.
#
$sharepkg = "";
# The books converted to HTML with this converter
# The values set are: 0 or 1 according to whether or not -c was used.
#
%convertbooks = ();
# This is added to when scanning for \UseGapDocReferences.
#
%gapdocbooks = ();
# Types of href label are:
# 0 (non -c books) : C<MMM>S<NNN>.htm
# 1 (-c books) : CHAP<MMM>.htm#SECT<NNN>
# 2 (== $gapdoc) : chap<M>.html#s<N>ss0
#
# It would be nice to support subsections properly like GapDoc,
# but this involves creating a subsection data-structure modelled
# on section, which is a mite non-trivial (maybe ... if I find time).
# For now in-text references go to the beginning of the chapter.
#
$gapdoc = 2;
# sansserif:
#
# Used mainly to set GAP in sans serif font. Inside <title> ... </title>
# there should *not* be any tags, since they are not translated there by
# web browsers, and hence sansserif should *not* be applied to anything
# that ends up in the <title> ... </title> field, but *is* quite appropriate
# for the header in the <h1> ... </h1> field at the top of the body of an
# HTML file and anywhere else within the body of an HTML file.
#
sub sansserif {
my ($name) = @_;
return "<font face=\"Gill Sans,Helvetica,Arial\">$name</font>";
}
# booktitle_body:
#
# This is for generating the title of a document that goes in the
# <h1> ... </h1> field at the top of the body, as opposed to the title
# that goes in the <title> ... </title> field which should be unembellished.
#
sub booktitle_body {
my ($bktitle, @prog_or_pkg) = @_;
foreach $prog_or_pkg (@prog_or_pkg) {
$newstring = sansserif $prog_or_pkg;
$bktitle =~ s/$prog_or_pkg/$newstring/;
}
return $bktitle;
}
#
# used to standardize section names for use as hash indices.
#
sub canonize {
my ($key) = @_;
$key =~ tr/A-Z/a-z/;
$key =~ s/\s//g;
$key =~ s/\\//g;
$key;
}
sub kanonize {
my ($key) = @_;
$key =~ s/\\ / /g;
$key =~ s/!/ /g;
$key;
}
sub def_section_by_name {
my ($sec, $chapno, $secno, $ssecno) = @_;
my $secname = canonize $1;
if (defined $sections_by_name{$secname}) {
if (($sections_by_name{$secname}->{chapnum} ne $chapno) ||
($sections_by_name{$secname}->{secnum} ne $secno) ||
($sections_by_name{$secname}->{ssecnum} ne $ssecno)) {
print STDERR "Section: \"$secname\" already defined as: ",
"$sections_by_name{$secname}->{chapnum}.",
"$sections_by_name{$secname}->{secnum}.",
"$sections_by_name{$secname}->{ssecnum}\n";
print STDERR "Now being redefined as: $chapno.$secno.$ssecno\n";
$redefined_secname{$secname} = 1;
} else {
return;
}
}
$sections_by_name{$secname}
= {chapnum => $chapno,
secnum => $secno,
ssecnum => $ssecno};
# print STDERR "Defined section \"$secname\": $chapno.$secno.$ssecno\n";
}
sub tonum { # Needed since chanu may be A,B,... for appendices
my ($chanu) = @_;
return $chanu =~ /\d+/ ? $chanu : $lastnumchap + ord($chanu) - ord('A') + 1;
}
# getchaps:
#
# Scan the .tex and .toc files to get chapter names and numbers,
# section names and numbers and associated filenames.
# Loads up chapters and sections_by_name.
#
sub getchaps {
open( TOC, "<${dir}manual.toc" )
|| die "Can't open ${dir}manual.toc.\n You can " .
"create the .toc file by doing: tex manual (at least once).\n";
my ($chap,$sec,$chapno,$chap_as_sec,$chapnam,$chanu);
while (<TOC>) {
if ( /$chapexp/o ) {
$chapnam = $2;
$chanu = $1;
$lastnumchap = $chanu if ( $chanu =~ /\d+/ );
# remove `(preliminary)' part that messes everything up
$chapnam =~ s/ \(preliminary\)//g;
$chap = {name => $chapnam,
number => $chanu};
$chap_as_sec = {name => $chapnam,
chapnum => $chanu,
secnum => 0,
chapter => $chap};
$chap->{sections}[0] = $chap_as_sec;
defined ($chapters[tonum $chanu]) && die "chapter number repeated";
$chapters[tonum $chanu] = $chap;
} elsif ( /$secexp/o ) {
defined ($chapters[tonum $1])
|| die "section $2:$3 in unknown chapter $1";
defined ($chapters[tonum $1]{sections}[$2])
&& die "section number repeated";
$sec = {name => $3,
secnum => $2,
chapnum => $1,
chapter => $chapters[tonum $1]};
$chapters[tonum $1]{sections}[$2] = $sec;
# this would produce warnings from empty chapters. Thus ignore.
# } elsif ( $_ !~ /$ignoreexp/o ) {
# print STDERR "Bad line: $_";
}
}
close TOC;
open (TEX, "<${dir}manual.tex") || die "Can't open ${dir}manual.tex";
$chapno = 0;
while (<TEX>) {
if ( /^[^%]*\\(|Pseudo)Input\{([^}]+)\}(\{([^}]+)\}\{([^}]+)\})?/ ) {
if (not -f "$dir$2.tex" or not -r "$dir$2.tex") {
print STDERR "Chapter file $2.tex does not exist in $dir\n";
}
if ($1 eq "") {
$chapters[++$chapno]{file} = $2;
} else {
$chapnam = $5;
$chanu = ++$chapno;
$lastnumchap = $chanu;
$chap = {name => $chapnam,
number => $chanu};
$chap_as_sec = {name => $chapnam,
chapnum => $chanu,
secnum => 0,
ssecnum => 0,
chapter => $chap};
if ($4 ne $5) {
def_section_by_name("$book:$chapnam", $chanu, 0, 0);
add_to_index(htm_fname($opt_c,$chanu,0),
$4, $chap_as_sec, 0);
}
$chap->{sections}[0] = $chap_as_sec;
defined($chapters[$chanu]) && die "chapter number repeated";
$chapters[$chanu] = $chap;
$chapters[$chanu]{file} = $2;
}
}
}
close TEX;
}
sub getlabs {
my ($bkdir) = @_;
open (LAB, "<${bkdir}manual.lab") || print "Can't open ${bkdir}manual.lab";
while (<LAB>) {
if ( /\\setcitlab/ ) {
next; # We don't get the bibliography labels from here
} elsif (/\\makelabel\s*\{([^}]+)\}\s*\{(\w+)(\.(\d+))?(\.(\d+))?\}/) {
def_section_by_name($1, $2, (defined($3) ? $4 : 0),
(defined($5) ? $6 : 0));
} else {
chomp;
print STDERR "Ignored line: $_\n... in ${bkdir}manual.lab\n";
}
}
close LAB;
}
#
# Mainly diagnostic, prints the chapters data structure. Also
# checks that each section has the correct back reference to its
# chapter
#
sub printchaps {
my @chapters = @_;
CHAP: foreach $chapter (@chapters) {
next CHAP unless (defined ($chapter));
print "Chapter $chapter->{number} $chapter->{name} $chapter->{file}\n";
SECT: foreach $section (@{$chapter->{sections}}) {
next SECT unless defined ($section);
print " Section $section->{chapnum}.$section->{secnum} $section->{name}\n";
if ($section->{chapter} ne $chapter ) {
print " loop problem\n";
}
}
}
}
# Printed at the bottom of every page.
$footer = "<P>\n" . sansserif( "GAP 4 manual<br>" . `date +"%B %Y"` ) .
"</body></html>";
# Section label ... this is the bit that goes after a # in an HREF link
# or is assigned to the value of NAME in an anchor.
#
sub sec_label {
my ($c_s_gapdoc,$cnum,$snum,$ssnum) = @_;
if ($c_s_gapdoc == $gapdoc) {
return "s${snum}ss${ssnum}";
}
$snum = "0" x (3 - length $snum) . $snum;
if ($c_s_gapdoc) {
if ($snum eq "000") {
return "";
} elsif ($ssnum) {
return "SSEC${snum}.$ssnum";
} else {
return "SECT${snum}";
}
} else {
return ($ssnum) ? "SSEC$ssnum" : "";
}
}
# The HREFs of subsections, sections and chapter files are determined by
# this routine directly if the chapter, section, subsection numbers are known.
sub htm_fname {
my ($c_s_gapdoc,$cnum,$snum,$ssnum) = @_;
my $seclabel = sec_label($c_s_gapdoc,$cnum,$snum,$ssnum);
$seclabel = "#$seclabel" if ($seclabel ne "");
if ($c_s_gapdoc == $gapdoc) {
return "chap${cnum}.html$seclabel";
}
$cnum = "0" x (3 - length $cnum) . $cnum;
$snum = "0" x (3 - length $snum) . $snum;
return ($c_s_gapdoc) ? "CHAP${cnum}.htm$seclabel"
: "C${cnum}S$snum.htm$seclabel";
}
# Returns the value that $opt_c must have had when the book $book
# was compiled with this converter.
sub hreftype {
my ($book, $bdir) = @_;
if ( !(exists $convertbooks{$book}) ) {
my @ls = `ls ${odir}$bdir`;
$convertbooks{$book}
= (grep { m/^CHAP...[.]htm$/ } @ls) ?
1 : # .htm files have shape CHAP<MMM>.htm
(grep { m/^CHAP...[.]htm$/ } @ls) ?
0 : # .htm files have shape C<MMM>S<NNN>.htm
$opt_c; # can't determine the shape ... don't exist
# yet ... we assume the shape of the current
# manual being compiled.
}
return $convertbooks{$book};
}
# The names of the section and chapter files are determined by this routine
# when one has to determine the chapter and section number indirectly.
sub name2fn {
my ($name,$ischap) = @_;
my $bdir = "";
my $c_s_gapdoc = $opt_c;
# : indicates a cross-volume reference
my $canon_name = canonize $name;
#print STDERR "canon_name = $canon_name\n";
if ( $canon_name =~ /^(ref|tut|ext|prg|new):/ ) {
if ($mainman==1) {
$bdir = "../$1/";
} else {
$bdir = "../../../doc/htm/$1/";
}
$c_s_gapdoc = hreftype($1, $bdir);
} elsif ($canon_name =~ /^([a-zA-Z_0-9]*):/ ) {
# presumably a package name
#print STDERR "package name = $1\n";
if ($mainman==1) {
if (exists $gapdocbooks{$1}) { # a main manual referring
$bdir = "../../../pkg/$1/doc/"; # to a GapDoc-produced manual
$c_s_gapdoc = $gapdoc;
} else {
$bdir = "../../../pkg/$1/htm/";
$c_s_gapdoc = hreftype($1, $bdir);
}
} elsif (exists $gapdocbooks{$1}) { # a package manual referring
$bdir = "../../$1/doc/"; # to a GapDoc-produced manual
$c_s_gapdoc = $gapdoc;
} else {
$bdir = "../../$1/htm/";
$c_s_gapdoc = hreftype($1, $bdir);
}
} elsif ($canon_name !~ /^($book):/) {
$name = "$book:$name";
$canon_name = canonize $name;
}
$name =~ s/\s+/ /g;
if (exists $redefined_secname{$canon_name}) {
print STDERR "Ref to multiply defined label: ",
"\"$name\" at line $. of $chap->{file}.tex\n";
}
my $sec = $sections_by_name{$canon_name};
unless (defined ( $sec)) {
print STDERR "Bad link: \"$name\" at line $. of $chap->{file}.tex\n";
return "badlink:$name";
}
return $bdir . htm_fname($c_s_gapdoc,
$sec->{chapnum},
($ischap == 1) ? 0 : $sec->{secnum},
($ischap == 1) ? 0 : $sec->{ssecnum});
}
# strip out the tag from cross book references for the body of links
sub name2linktext {
my $name;
($name) = @_;
$name =~ s/^(ref|tut|ext|prg|new)://;
return $name;
}
#
# Add an index entry to the index.
# ($hname = $fname or $fname#..., where $fname is a filename)
sub add_to_index {
my ($hname, $key, $sec) = @_;
my $secno = "$sec->{chapnum}.$sec->{secnum}";
if (defined $sec->{ssecnum} and $sec->{ssecnum}) {
$secno .= ".$sec->{ssecnum}";
}
push @{$index{$key}}, [ $hname, $secno ];
# print STDERR "hname = $hname, key = $key, ";
# print STDERR "sec = $secno\n";
}
#
# Create a label for an index entry, add it to the index if new,
# and return the label (which is an empty string if not new).
sub inxentry {
my ($fname,$key,$sec) = @_;
my $curs="$sec->{chapnum}.$sec->{secnum}";
# print STDERR "curs = $curs\n";
# print STDERR "fname = $fname, key = $key, ";
# print STDERR "sec = $sec->{chapnum}.$sec->{secnum}\n";
my $label = "<a name = \"I$indexcount\"></a>\n";
if (defined $index{$key}) {
my $ar;
foreach $ar (@{$index{$key}}) {
if ( ($ar->[1]) eq $curs ) {
$label=""; # index entry is not new
last;
}
}
} else {
$index{$key} = [];
}
if ($label ne "") {
add_to_index("$fname#I$indexcount", $key, $sec);
# print STDERR "$fname#I$indexcount\n";
$indexcount++;
}
return $label;
}
#
# Return a NAME anchor for a subsection
#
sub subsec_name {
my ($fname,$key,$sec) = @_;
# print STDERR "curs = $curs\n";
# print STDERR "sec = $sec->{chapnum}.$sec->{secnum}.$sec->{ssecnum}\n";
$key =~ s/!\{(.*)\}$/!$1/;
$key =~ s/\s+/ /g;
my $canon_name = canonize "$book:$key";
my $sec_of_key = $sections_by_name{$canon_name};
if (exists $redefined_secname{$key}) {
print STDERR "Multiply defined label: ",
"\"$key\" at line $. of $chap->{file}.tex\n",
"... subsection will be unreachable\n";
return "";
} elsif ($sec_of_key->{chapnum} ne $sec->{chapnum} ||
$sec_of_key->{secnum} ne $sec->{secnum}) {
print STDERR "Section of \"$key\" (",
"$sec_of_key->{chapnum}.$sec_of_key->{secnum}) ",
"doesn't agree with the current section (",
"$sec->{chapnum}.$sec->{secnum}) ",
"at line $. of $chap->{file}.tex\n",
"... subsection will be unreachable\n";
return "";
} else {
my $curs = "$sec_of_key->{chapnum}.$sec_of_key->{secnum}" .
".$sec_of_key->{ssecnum}";
my $label = sec_label($opt_c, $sec_of_key->{chapnum},
$sec_of_key->{secnum},
$sec_of_key->{ssecnum});
if (defined $index{$key}) {
my $ar;
foreach $ar (@{$index{$key}}) {
if ( ($ar->[1]) eq $curs ) {
return ""; # index entry is not new
}
}
} else {
$index{$key} = [];
}
# print STDERR "Subsection key: \"$key\"\n";
add_to_index("$fname#$label", $key, $sec_of_key);
return "<a name = \"$label\"></a>\n";
}
}
# Some characters must be represented differently in HTML.
sub html_literal {
my ($lit) = @_;
if ($lit eq "<") { return "&lt;"; }
elsif ($lit eq ">") { return "&gt;"; }
elsif ($lit eq "&") { return "&amp;"; }
else { return $lit; }
}
# Gather lines ending in % together.
sub gather {
my ($line, $nontex) = @_;
my $nextline;
while ($line =~ s/%+\s*$// and defined($nextline = <IN>)) {
$nextline =~ s/^%// if $nontex;
unless ($nextline =~ /^%/) {
$nextline =~ s/^\s*//;
$line .= $nextline;
chomp $line;
}
}
return $line;
}
# This routine is called to process the text of the section
# the output file is assumed to be pre-selected. The input filehandle
# is simply IN
#
# As we process, we can be in "normal" mode (text), "maths" mode
# inside $ ... $, or "verbatim" mode inside a multi-line example
#
# We separately track whether we are in bold or tt,
# whether we are in a xxx: .... paragraph and whether we are reading
# a cross-reference that is split across multiple lines
#
# Finally, we track whether we have already
# emitted a <P> for this group of blank lines
#
$boldcommands = 'CAS|[A-Z]|danger|exercise';
$TeXbinops = "in|wedge|vee|cup|cap|otimes|oplus|le|ge|rightarrow";
$EndTeXMacro = "(?![A-Za-z])";
$TeXaccents = "\'`~=^"; # ^ must come last, this is also used as regexp
# From these and the argument following the HTML symbol is built
# e.g. `a -> &agrave;
%accents = ( "\'" => "acute", "19" => "acute",
"`" => "grave", "18" => "grave",
"~" => "tilde", "126" => "tilde",
"^" => "circ", "94" => "circ",
"c" => "cedil", "48" => "cedil",
"H" => "uml", "125" => "uml", "127" => "uml" );
# These are the replacements for accents that have an empty argument
# or for which there is no single HTML symbol (so that the accent must
# precede the argument)
%acc_0arg = ( "\'" => "\'", "19" => "\'",
"`" => "`", "18" => "`",
"~" => "~", "126" => "~",
"=" => "macr", "22" => "macr",
"^" => "^", "94" => "^",
"c" => "", "48" => "", # too hard ... just omit
"d" => "", # too hard ... just omit
"b" => "", # too hard ... just omit
"t" => "", # too hard ... just omit
"u" => "\\u", "21" => "\\u", # too hard ... put back
"v" => "\\v", "20" => "\\v", # too hard ... put back
"H" => "uml", "125" => "uml", "127" => "uml" );
# Calls tth to find out its version number
sub tth_version {
`tth -H >tthout 2> tthout`;
open (TTHOUT, "<tthout") || die "Can't read tthout\n";
while (<TTHOUT>) {
if (s/.*(Version [^ ]*).*/$1/) {
close TTHOUT;
system("rm tthout");
chomp;
return $_;
}
}
}
# We use this routine when using -t option to do any maths translation
sub tth_math_replace {
my ($tth) = @_;
open (TTHIN, ">tthin") || die "Can't create tthin";
#print STDERR "in: ${tth}\n";
my $tthorig = $tth;
# replace <...> by proper TeX
while ($tth =~ /(.*[^\\])<(.*[^\\])>(.*)/) {
$tth= $1."{\\it ".$2."\\/}".$3;
}
# replace `...' by proper TeX
while ($tth =~ /(.*[^\\])`(.*[^\\])\'(.*)/) {
$tth= $1."{\\tt ".$2."}".$3;
}
# replace \< by proper TeX
while ($tth =~ /(.*[^\\])\\<(.*)/) {
$tth= $1."<".$2;
}
#while ($tth =~ /(.*[^\\])\\>(.*)/) {
# $tth= $1.">".$2;
#}
$tth =~ s/([^\\]|^)([.])/$1\\cdot /g; # . not preceded by \ becomes \cdot
$tth =~ s/\\[.]/./g; # \. becomes .
$tth =~ s/(\\right)\\cdot/$1./g; # ... except for \right. (leave as is)
$tth =~ s/(\\not)\s*/$1/g;
$tth =~ s/\\\*/*/g;
if ($opt_t < 2.52) {
$tth =~ s/\\not\\in(?![a-zA-Z])/\\notin/g;
$tth =~ s/\\not\\subset/ not subset/g;
}
# Ensure display mode used for \buildrel and \choose constructions
$tth =~ s/\$/\$\$/g if ($tth =~ /\\buildrel|\\choose/ and $tth !~ /\$\$/);
if ($tth =~ /\\[A-Za-z]/) {
# there might be macros: Load our macros
#print STDERR "tth: ${tth}\n";
print TTHIN "\\input tthmacros.tex\n";
}
# we put in TTHBEGIN .. TTHEND
# so we can strip out the superfluous <p>s
# tth 2.78+ puts in, later.
print TTHIN "TTHBEGIN${tth}TTHEND\n";
close TTHIN;
`$tthbin -r -i <tthin >tthout 2>/dev/null`;
open (TTHOUT, "<tthout") || die "Can't read tthout";
$tth="";
while ( $tthin = <TTHOUT> ) {
chomp($tthin);
$tth .= $tthin;
}
close TTHOUT;
#print STDERR "out: ${tth}\n";
# only the stuff between TTHBEGIN and TTHEND
# actually belongs to the formula translated
$tth =~ s/.*TTHBEGIN(.*)TTHEND.*/$1/
|| do {print STDERR "!tth failed with input:\n $tthorig\n",
"!Null formula written to HTML file\n";
$tth = "";};
# tth leaves \mathbin etc. in ... get rid of them if present
$tth =~ s/\\math(bin|rel|op)//g;
# TtH up to version 2.86 doesn't know the following
$tth =~ s/\\wr(?![a-zA-Z])/ wr /g;
$tth =~ s/\\vdash(?![a-zA-Z])/ |- /g;
$tth =~ s/\\tilde(?![a-zA-Z])/~/g; # needed for in-line maths
#print STDERR "stripped: ${tth}\n";
# replace italic typewriter (happens because we force
# italic letters) by roman typewriter style
while ($tth =~ /(.*)<tt><i>(.*)<\/i><\/tt>(.*)/) {
$tth= $1."<tt>".$2."</tt>".$3;
}
# increasing the font size doesn't affect maths displays
# ... and `...' markup doesn't get increased in font size
# So let's get rid of it.
#$tth = "<font size=\"+1\">$tth</font>";
#print STDERR "enlarged: ${tth}\n";
return $tth;
}
#
# Takes a line of form: "<head><spaces>{<arg>}<rest>"
# and returns an array with: <rest>, <arg>, <head>
# i.e. it finds the matching } for {.
sub get_arg {
my ($line) = @_;
if ($line =~ /\s*\{([^{}]*)/) {
$line = $`;
my $arg = $1;
my $rest = $';
my $nbraces = 1;
while ($nbraces) {
if ($rest =~ s/^(\{[^{}]*)//) {
$arg .= $1;
$nbraces++;
} elsif ($nbraces == 1 and $rest =~ s/^\}//) {
$nbraces--;
} elsif ($rest =~ s/^(\}[^{}]*)//) {
$arg .= $1;
$nbraces--;
} else { # abort ... but make sure braces match
$rest = "{" x $nbraces . $rest;
$arg .= "}" x ($nbraces - 1);
$nbraces = 0;
}
}
return ($rest, $arg, $line);
} else {
print STDERR "line:$line\n";
die "Expected argument: at line $. of file";
}
}
#
# Given an accent macro with the \ or \accent stripped and the rest
# of a line with the macro's argument at it beginning return the
# HTML version of the accented argument and rest after the macro's
# argument has been stripped from it.
sub do_accent {
my ($rest, $macro) = @_;
$rest =~ /^(\w)|\{(\w?)\}/;
$rest = $';
my $arg = (defined $1) ? $1 : $2;
$macro = ($arg eq "") ? $acc_0arg{$macro} : "&$arg$accents{$macro};";
return ($rest, $macro);
}
#
# Takes rest which has a TeX macro without its \ at its beginning and
# returns the HTML version of the TeX macro and rest with the TeX macro
# stripped from it.
sub macro_replace {
my ($rest) = @_;
if ($rest =~ /^([$TeXaccents])\s*/) {
return do_accent($', $1);
}
if ($rest =~ /^([a-zA-Z]+)\s*/) {
$rest = $';
my $macro = $1;
if ($macro eq "accent") {
$rest =~ /^(\d+)\s*/;
$rest = $';
$macro = $1;
$macro = "" unless (defined $acc_0arg{$macro});
}
if (defined $accents{$macro}) { return do_accent($rest, $macro); }
elsif (defined $acc_0arg{$macro}) { return ($rest, $acc_0arg{$macro}); }
elsif ($macro eq "copyright") { return ($rest, "&copy;"); }
elsif ($macro eq "aa") { return ($rest, "&aring;"); }
elsif ($macro eq "AA") { return ($rest, "&Aring;"); }
elsif ($macro eq "lq") { return ($rest, "`"); }
elsif ($macro =~ /^(rq|pif)$/) { return ($rest, "'"); }
elsif ($macro =~ /^($boldcommands)$/)
{ return ($rest,"<font face=\"helvetica,arial\">".uc($&)."</font>"); }
elsif ($macro =~ /^(GAP|ATLAS|MOC$sharepkg)$/)
{ return ($rest, sansserif $macro); }
elsif ($macro eq "package")
{ my ($last, $arg, $first) = get_arg("$rest"); # $first = ""
return ($last, sansserif $arg);}
elsif ($macro eq "sf")
{ my ($last, $arg, $first) = get_arg("{$rest"); # $first = ""
return ($last, sansserif $arg);}
elsif ($macro =~ /^([hv]box|rm|kernttindent|math(bin|rel|op))$/)
{ return ($rest, "");}
elsif ($macro =~ /^(obeylines|(begin|end)group)$/)
{ return ($rest, "");}
elsif ($macro =~ /^hfil(|l)$/) { return ($rest, " ");}
elsif ($macro =~ /^break$/) { return ($rest, "<br>");}
elsif ($macro =~ /^(it|sl)$/)
{ my ($last, $arg, $first) = get_arg("{$rest"); # $first = ""
return ("$arg}\\emphend $last", "<em>");}
# pseudo ``emph'' end token
elsif ($macro eq "emphend") { return ($rest, "</em>"); }
elsif ($macro eq "hrule") { return ($rest, "<hr>"); }
elsif ($macro eq "enspace") { return ($rest, "&nbsp;"); }
elsif ($macro eq "quad") { return ($rest, "&nbsp;"); }
elsif ($macro eq "qquad") { return ($rest, "&nbsp;&nbsp;"); }
elsif ($macro eq "ss") { return ($rest, "&szlig;"); }
elsif ($macro eq "o") { return ($rest, "&oslash;"); }
elsif ($macro eq "O") { return ($rest, "&Oslash;"); }
elsif ($macro =~ /^l?dots$/) { return ($rest, "..."); }
elsif ($macro =~ /^bs?f|stars$/) { return ($rest, "<hr>"); }
elsif ($macro eq "cr") { return ($rest, "<br>"); }
# <li> in the next line would be invalid HTML
elsif ($macro eq "fmark") { return ($rest, "&nbsp;"); }
elsif ($macro eq "item")
{ ($rest, $itemarg, $first) = get_arg("$rest"); # $first = ""
if ($listdepth == 2) {
$listdepth = 1;
if ($listtype eq "d") {
return ("$itemarg\\itmnd $rest", "\n</dl>\n<dt>");
} else { #ignore bit in braces (ordered and unordered lists)
return ($rest, "\n</${listtype}l>\n<li>");
}
} else {
if ($listtype eq "d") {
return ("$itemarg\\itmnd $rest", "<dt>");
} else { #ignore bit in braces (ordered and unordered lists)
return ($rest, "<li>");
}
}
}
elsif ($macro eq "itemitem")
{ ($rest, $itemarg, $first) = get_arg("$rest"); # $first = ""
$rest =~ /^(%(un|)ordered)? #defines $sublisttype
(\{([1aAiI])\})? #defines TYPE of ordered sublist
(\{(\d+)\})? #defines START of ordered sublist
/x;
if ($listdepth == 1) {
$sublisttype = list_type($1, $2);
$sublistentry = begin_list($sublisttype, $3, $4, $5, $6) . "\n";
$listdepth = 2;
} else {
$sublistentry = "";
}
if ($sublisttype eq "d") {
return ("$itemarg\\itmnd $rest", "$sublistentry<dt>");
} else { #ignore bit in braces (ordered and unordered lists)
return ($rest, "$sublistentry<li>");
}
}
# pseudo ``itemend'' character
elsif ($macro eq "itmnd") { return ($rest, "<dd>"); }
elsif ($macro eq "cite" and $rest =~ /^\{\s*(\w+)\s*\}/)
{ return ($', "<a href=\"biblio.htm#$1\"><cite>$1</cite></a>"); }
elsif ($macro eq "URL" and $rest =~ /^\{([^\}]*)\}/)
{ return ($', "<a href=\"$1\">$1</a>"); }
elsif ($macro eq "Mailto" and $rest =~ /^\{([^\}]*)\}/)
{ return ($', "<a href=\"mailto:$1\">$1</a>"); }
else { return ($rest, $macro); }
} elsif ($rest =~ /^-/) {
return ($', ""); # hyphenation help -- ignore
} elsif ($rest =~ /^</) {
return ($', "&lt;");
} elsif ($rest =~ /^\&/) {
return ($', "&amp;");
} else {
$rest =~ /^./;
return ($', $&);
}
}
# Returns the type of a list
sub list_type {
my ($type, $un) = @_;
return ( !(defined $type) ) ? "d" #descriptive
: ($un eq "un")
? "u" #unordered
: "o"; #ordered
}
# Returns a string for starting a list of the appropriate type
sub begin_list {
my ($listtype, $otypedef, $otype, $ostartdef, $ostart) = @_;
my $beginlist = "<${listtype}l";
if ($listtype eq "d") {
$beginlist .= " compact";
} elsif ($listtype eq "o") {
if ( (defined $otypedef) && (defined $otype) ) {
$beginlist .= " type=$otype";
if ( (defined $ostartdef) && (defined $ostart) ) {
$beginlist .= " start=$ostart";
}
}
}
$beginlist .= ">";
return $beginlist;
}
#
# This could probably be done more cleverly -- this routine is too long
#
sub convert_text {
my $fname = $_[0];
my $refchars = '[\-\\w\\s`\',./:!()?$]'; # these make up cross references
my $ref = "";
my $endline = ""; # used for </code> at the end of line
my $mode = "normal"; # $mode can be:
# "normal" : TeX macros need to be interpreted
# "verbatim" : No interpretation done, except that
# || is converted to |.
# "html" : No interpretation done, except that
# initial % is removed.
# "maths" : A variant of "normal" where inside
# $...$ or $$...$$ (TeX's math mode)
my $ttenv = 0; # $ttenv is set to 1 in \begintt .. \endtt "verbatim" mode
my $nontex = 0; # $nontex is set to 1 in %display{nontex} and
# %display{nontext} env'ts, for which $mode is "normal"
# but initial % of each line is removed.
my $skip_lines = 0; # $skip_lines is set non-zero in %display{tex},
# %display{text}, %display{jpeg}, %display{nonhtml}
# and \answer env'ts
my ($bold,$tt,$it,$sub,$sup,$inlist,$inref,$donepar) = (0,0,0,0,0,0,0);
my ($indexarg,$indexarg2,$zwei,$drei,$vier,$macro,$endmath,$endmathstring);
#
# Now we loop over lines. a line with 16 initial % signs marks
# end of section
#
LINE: while (defined($_ = <IN>) and not /^\%{16,}/) {
chomp; # drop the trailing newline
my $rest = $_; # rest of the line to scan
my $outline = ""; # build the output in here
# First we deal with various special whole lines.
# \beginexample, \begintt, %display (this may end a $skip_lines)
if ($mode eq "normal" and /^\\begin(example|tt)/) {
if ($_ =~ /^\\begintt/) { # This is to catch a \begintt .. \endtt
$ttenv = 1; # environment enclosing \beginexample ..
} # \endexample
$mode = "verbatim";
$skip_lines = 0;
print "<pre>\n";
next LINE;
} elsif ($mode eq "normal" and /^%display\{nontex(|t)\}/) {
$nontex = 1;
$skip_lines = 0;
next LINE;
} elsif ($mode eq "normal" and /^%display\{(text?|jpeg|nonhtml)\}/) {
# Paragraphs to be skipped by HTML.
$mode = "normal";
$nontex = 0;
$skip_lines = 2;
next LINE;
} elsif ($mode eq "normal" and /^%display\{html\}/) {
$mode = "html";
$skip_lines = 0;
} elsif ($mode eq "html" and /^%display\{text\}/) {
$mode = "normal";
$nontex = 0;
$skip_lines = 2;
next LINE;
} elsif (/^%enddisplay/ and !$ttenv) {
if ($mode eq "verbatim") {
print "</pre>\n";
}
$mode = "normal";
$nontex = 0;
$skip_lines = 0;
next LINE;
} elsif ($mode eq "verbatim") {
# \endexample, \endtt
if (/^\\endtt/ or (/^\\endexample/ and !$ttenv)) {
$mode = "normal";
$ttenv = 0;
print "</pre>\n";
next LINE;
}
# |_
if (/^\|_/) {
next LINE;
}
} elsif ($mode eq "html") {
if (/^%/) {
print "$'\n";
} else {
print STDERR "Line $. ignored in \%display{html} mode, " .
"because it didn't start with \%\n";
}
next LINE;
} elsif ((!$nontex and /^%/) ||
(!/\\(at|)index/ and /^([{}]|\s*\{?\\[a-zA-Z].*)%$/)) {
# Ignore lines starting with a % except if in html or verbatim
# modes (dealt with above) or if in nontex mode which we deal
# with below.
# Also ignore specific lines ending in a % (we have to be careful
# here -- % also indicates a continuation). The lines we ignore are
# those that match: "{%", "}%", "{\\X..%", "\\X..%" where X denotes
# any letter and .. any sequence of chars. This is meant to exclude
# lines like "{\obeylines ... %", "\begingroup ... %". If this proves
# problematic the .tex files will need to use the %display{tex} env't
# to exclude such lines.
next LINE;
# All that's left are whole lines that occur in "normal" mode
} else {
# Line skipping.
if ($skip_lines) {
if ($skip_lines == 1 and $_ =~ /^\s*$/) {
$skip_lines = 0;
}
next LINE;
}
# Remove initial % if there is one when in %display{nontex} or
# %display{nontext} environment
if ($nontex) {
s/^%//;
$rest = $_;
}
# a '%' at end-of-line indicates a continuation
$_ = gather($_, $nontex);
# Paragraphs are ended by blank lines.
if (/^\s*$/) {
unless ($donepar) {
$outline .= "<p>\n";
$donepar = 1;
}
# If we get to the end of a paragraph we assume that we have
# lost track of what is going on, warn and try to resume.
if ($mode eq "maths" or $inref) {
print STDERR "Paragraph ended in $mode mode at $.\n" .
"reverting to normal\n";
$outline .= "</I>" if ($mode eq "maths");
$mode = "normal";
}
print $outline;
next LINE;
}
# Vertical skips.
if (/^\\(med|big)skip/) {
$outline .= "<p>";
print "$outline\n";
next LINE;
}
# Index entries -- emit an anchor and remember the index
# keys for later there may be several on one line and
# several references to one key
if (/^\\(at|)index/) {
# $_ = gather($_, $nontex); # already done above
while (/\\((at|)index(tt|))\{/g) {
($rest, $indexarg) = (get_arg("{".$'))[0,1];
if ($1 eq "atindex") {
($indexarg2) = (get_arg($rest))[1];
if ($indexarg2 =~ /^@/) {
$indexarg = $';
$indexarg =~ s/\\noexpand\s*`([^']*)'/$1/g;
$indexarg =~ s/\\noexpand\s*<([^>]*)>/$1/g;
$indexarg =~ s/\\noexpand//g;
$indexarg =~ s/\|.*//; # remove "|indexit" if present
# $indexarg might still have macros ...
# we should do something about these too
}
}
# Just the crudest form of macro removal - probably enough
$indexarg =~ s/\\(.)/$1/g;
$indexarg =~ s/\$//g; #assume $s match in pairs!!
$bla = inxentry($fname,$indexarg,$sec);
$outline .= $bla;
print "$outline\n";
}
next LINE;
}
# \> and \) lines (joined with next line if ending in %)
if (/^\\[>)]/) {
# $_ = gather($_, $nontex); # already done above
# if \> with ` or ( without a matching ' or ) gather lines
if ( /^\\> *\`/ ) { # line should have ended in a %
while ( !/\'/ ) { $_ = gather("$_%", $nontex); }
} elsif ( /^\\>.*\(/ ) { # line should have ended in a %
while ( !/\)/ ) { $_ = gather("$_%", $nontex); }
}
# get rid of @{...} or @`...' if present.
if (/@/) {
# print STDERR "before:$_\n";
if (s/@\s*(\{[^{}]*\}|\`[^\']*\')\s*/ /) { # easy
} elsif (/@\s*/) {
# nested braces ... need to find matching brace
$_ = $`;
($rest) = get_arg($');
$_ .= " $rest";
$rest ="";
}
# print STDERR "after:$_\n";
print STDERR "@ still present at $_" if (/@/);
}
}
# if there is a comment in square brackets we extract it now
# ... this way if this feature is undesirable we can easily get
# rid of it
my $comment = "";
# These cases [<something>] is not a comment:
# \><anything>; # [<arg>] here is treated as an optional arg
# \>`<func-with-args>'{<func>![gdfile]} # possibility from
# # buildman.pe \Declaration
if (/^\\>(.*;|`[^\']+\'{[^}!]*!\[[^\]]*\]})/) {
;
} elsif (/^\\>.*\(/) {
if (s/^(\\>[^(]*\([^)]*\)[^\[]*)(\[[^\]]*\])/$1/) {
$comment = " $2";
}
} elsif (s/^(\\>[^\[]*)(\[[^\]]*\])/$1/) {
$comment = " $2";
}
# \>`<variable>' V
if (/^\\> *`([^\']+)\'\s*(\[[^\]]*\])?\s*V?\s*$/) {
$endline = "</code>";
$outline .= subsec_name($fname,$1,$sec); # $1 = <variable>
$outline .= "<dt>" if $inlist;
$outline .= "<li><code>";
$tt = 1;
$rest = $1.$comment." V";
}
# \>`<non-func>'{<label>}[!<sub-entry>][ <capital>]
# <capital> is usually one of A-Z (but any non-space will be matched)
elsif (/^\\> *`([^\']+)\'\s*\{([^}]+)\}(!\{.*\})?\s*([^\s]+)?\s*$/) {
# $1 = <non-func> $2 = <label> [$3 = !<sub-entry>][$4 = <capital>]
$endline = "</code>";
$drei = defined($3) ? $3 : "";
$vier = defined($4) ? " $4" : "";
# $2$drei = <label><sub-entry>
$outline .= subsec_name($fname,"$2$drei",$sec);
#print STDERR "non-func:$1 - $2 - $drei - $vier |$2$drei|\n";
$outline .= "<dt>" if $inlist;
$outline .= "<li><code>";
$tt = 1;
$rest = $1.$comment.$vier;
}
# \><func>[(<args>)][!{<sub-entry>}][ <capital>]
# <capital> is usually one of A-Z (but any non-space will be matched)
elsif (/^\\> *([^(]+)(\([^)]*\))?(!\{.*\})?\s*([^\s]+)?\s*$/) {
# $1 = <func> $2 = (<args>) [$3 = !<sub-entry>][$4 = <capital>]
$endline = "</code>";
$zwei = defined($2) ? $2 : "";
$drei = defined($3) ? $3 : "";
$vier = defined($4) ? " $4" : "";
$outline .= subsec_name($fname,"$1$drei",$sec);
# $1$drei = <func><sub-entry>
#print STDERR "func:$1 - $zwei - $drei - $vier |$1$drei|\n";
$outline .= "<dt>" if $inlist;
$outline .= "<li><code>";
$tt = 1;
$rest = $1.$zwei.$comment.$vier;
}
elsif (/^\\\>/) {
die "Didn't find an appropriate \\> match for $_ ... syntax?";
}
elsif (/^\\\) *(.*)$/) {
$endline = "</code>";
$outline .= "<dt>" if $inlist;
if ($donepar) {
$outline .= "<code>";
} else {
$outline .= "<br><code>";
}
$tt = 1;
$rest = $1;
# Skip all other lines starting or ending in % or containing
# `align'.
} elsif ($mode ne "verbatim" and
$_ =~ /^\s*%|%\s*$|\\[a-z]+align/) {
next LINE;
}
}
# Here we have a "non-special" line to process We scan it for
# special characters and deal with them individually $rest
# contains the text that we have yet to look at We accumulate
# the output in $outline, rather than printing it because a &
# requires us to back up to start of line
$donepar = 0;
# The (rare) situation that we are processing a multi-line cross
# reference is handled specially.
if ($inref) {
# if it finishes on this line emit the link
# otherwise keep accumulating it
if ($rest =~ /^$refchars+\"/o) {
$rest = $';
chop($ref .= $&);
$ref1 = name2fn($ref,0);
$ref2 = name2linktext($ref);
$outline .= "<a href=\"$ref1\">$ref2</a>";
$inref = "0";
} elsif ($rest =~ /^$refchars*$/o) {
$ref .= "$rest ";
next LINE;
} else {
die "Bad reference. So far $ref, now got $rest";
}
}
# || really means | in verbatim mode
$rest =~ s/\|\|/\|/g if ($mode eq "verbatim");
# The main case, scan for special characters.
SPECIAL: while ( $rest =~ /[\\{}\$<>`\'*\"&%~_^]/ ) {
$outline .= $`; # the part that we scanned past
$rest = $'; # the remainder
my $matched = $&; # the character matched
# In verbatim mode, everything is passed to HTML.
if ($mode eq "verbatim") {
# if ($matched ne "%") {
$outline .= html_literal $matched;
# }
next SPECIAL;
}
# backslash
if ($matched eq "\\") {
# commands that begin a new output line
NEWLINE: {
if ($rest =~ /^beginitems/ and not $inlist) {
$outline .= "<p>\n<dl compact>";
$inlist = 1;
} elsif ($rest =~ /^enditems/ and $inlist) {
$outline .= "</dl>";
$inlist = 0;
} elsif ($rest =~ /^beginlist
(%(un|)ordered)? #defines $listtype
(\{([1aAiI])\})? #defines TYPE of ordered list
(\{(\d+)\})? #defines START of ordered list
/x ) {
$listtype = list_type($1, $2);
$outline .= begin_list($listtype, $3, $4, $5, $6);
$listdepth = 1;
} elsif ($rest =~ /^endlist/) {
$outline .= ("</${listtype}l>") x $listdepth;
$listdepth = 0;
} elsif ($rest =~ /^answer/) {
$outline = "";
$skip_lines = 1;
} else {
last NEWLINE;
}
print "$outline\n";
next LINE;
}
# commands that are replaced by HTML text
REPLACE: {
($rest, $macro) = macro_replace($rest);
$outline .= $macro;
next SPECIAL;
}
# Try to get nice spacing around certain maths constructs that
# are used a lot.
if ($mode eq "maths") {
MATHREPLACE: {
if ($rest =~/^($TeXbinops)$EndTeXMacro/o) {
$outline .= " $1 "; }
elsif ($rest =~/^backslash$EndTeXMacro/o) {
$outline .= " \\ "; }
elsif ($rest =~/^split$EndTeXMacro/o) {
$outline .= ":"; }
elsif ($rest =~/^langle$EndTeXMacro/o) {
$outline .= " &lt;"; }
elsif ($rest =~ /^rangle$EndTeXMacro/o) {
$outline .= "&gt; "; }
else { last MATHREPLACE; }
$rest = $';
next SPECIAL;
}
}
# Take the next character literally.
if ($rest ne "") {
$outline .= html_literal substr($rest,0,1);
$rest = substr($rest,1);
}
next SPECIAL;
}
# Subscripts and superscripts in math mode.
if ($mode eq "maths" and !$sub and !$sup) {
SUBSUPER: {
if ($matched eq "_" and $rest =~ /^\{/) {
$outline .= "<sub>";
$sub = 1; if ($tt) { $tt++; } }
elsif ($matched eq "^" and $rest =~ /^\{/) {
$outline .= "<sup>";
$sup = 1; if ($tt) { $tt++; } }
elsif ($matched eq "_" and $rest =~ /^[^\\]/) {
$outline .= "<sub>$&</sub>"; }
elsif ($matched eq "^" and $rest =~ /^[^\\]/) {
$outline .= "<sup>$&</sup>"; }
else { last SUBSUPER; }
$rest = $';
next SPECIAL;
}
}
if ($matched =~ /[_^]/) {
$outline .= $matched;
next SPECIAL;
}
# Braces are ignored, but must must be balanced inside `...'.
if ($matched eq "{") {
if ($tt) { $tt++; }
if ($sub) { $sub++; }
elsif ($sup) { $sup++; }
next SPECIAL;
}
if ($matched eq "}") {
if ($tt == 1) {
# print STDERR "o:$outline,m:$matched,r:$rest\n";
die "Unbalanced braces in `...' ($outline$matched$rest)";
}
if ($tt) { $tt--; }
if ($sub and !--$sub) { $outline .= "</sub>"; }
if ($sup and !--$sup) { $outline .= "</sup>"; }
next SPECIAL;
}
# A tilde is a non-break space.
if ($matched eq "~") {
$outline .= "&nbsp;";
next SPECIAL;
}
# $ toggles maths mode.
if ($matched eq "\$") {
if ($rest =~ /^\$/) {
$rest = $';
$endmath = "[\$][\$]";
$endmathstring = "\$\$";
} else {
$endmath = "[\$]";
$endmathstring = "\$";
}
if ($opt_t) {
if ($mode eq "normal") {
$tth= "";
$mode = "tth";
while ($mode eq "tth") {
if ( $rest =~ /$endmath/ ) {
$tth .= $`; # the part scanned past
$rest = $';
# make a math mode string
$tth = "$endmathstring$tth$endmathstring";
# pass $tth to tth to convert to HTML
# and append the result
$outline .= tth_math_replace($tth);
$mode = "normal";
}
else {
# we are in tth mode but the line has no terminating
# $ or $$: continue into next line
if ($rest =~ s/%$//) { # Mirror TeX behaviour when
$tth .= $rest; # line ends in a % ...
$rest = <IN>; # swallow whitespace at
$rest =~ s/^\s*//; # beginning of next line
} else {
$tth .= $rest." ";
$rest = <IN>;
}
chomp($rest);
}
}
next SPECIAL;
} else {
die "math mode messup";
}
} else {
$outline .= "<p>" if ($endmathstring eq "\$\$");
if ($mode eq "maths") {
if ($sub) { die "Math mode ended during subscript ".
"($outline$matched$rest)"; }
elsif ($sup) { die "Math mode ended during superscript ".
"($outline$matched$rest)"; }
$mode = "normal";
$outline .= "</var>";
if ($tt) { $outline .= "<code>"; }
next SPECIAL;
}
$mode = "maths";
if ($tt) { $outline .= "</code>"; }
$outline .= "<var>";
next SPECIAL;
}
}
# < > open and close italics.
if ($matched eq "<") {
if (not $it) {
if ($tt) { $outline .= "</code>"; }
$outline .= "<var>";
$it = 1;
} else {
$outline .= "&lt;";
}
next SPECIAL;
}
if ($matched eq ">") {
if ($it) {
$outline .= "</var>";
if ($tt) { $outline .= "<code>"; }
$it = 0;
} else {
$outline .= "&gt;";
}
next SPECIAL;
}
# * in normal mode toggles bold-face.
if ($matched eq "*") {
if ($mode eq "normal" and not $tt) {
if ($bold) {
$outline .= "</strong>";
$bold = 0;
} else {
$outline .= "<strong>";
$bold = 1;
}
} else {
$outline .= "*";
}
next SPECIAL;
}
# ` and ' in normal mode control typewriter.
if ($matched eq "`") {
if ($tt) {
$outline .= "`";
} elsif ( $rest =~ /^`/ ) {
$rest = $';
$outline .= "``";
} else {
$tt = 1;
$outline .= "<code>";
}
next SPECIAL;
}
if ($matched eq "\'") {
if ($tt == 1) {
$outline .= "</code>";
$tt = 0;
} else {
$outline .= "\'";
}
next SPECIAL;
}
# & signals a definition. We go back to start of line for the
# tag, and on to end of para for the definition. We do not
# merge adjacent definitions into the same list.
if ($matched eq "&") {
if ($inlist) {
$outline = "<dt>$outline<dd>"; # Sometimes we get an extra
} # <dt> we don't need ...
next SPECIAL; # but it has no effect :)
}
# " starts a cross-reference. If it ends on the same input
# line then we can deal with it at once otherwise we set
# $inref.
if ($matched eq "\"") {
if ($tt) {
$outline .= "\"";
next SPECIAL;
}
if ($rest =~ /^$refchars+\"/o) {
$rest = $';
chop($ref = $&);
$ref1 = name2fn($ref,0);
$ref2 = name2linktext($ref,0);
$outline .= "<a href=\"$ref1\">$ref2</a>";
next SPECIAL;
}
if ($rest =~ /^$refchars*$/o) {
$ref = "$rest ";
$inref = 1;
print $outline;
next LINE;
}
die "Bad reference $rest at $_";
}
# Ignore from % to end of line, on-line browser does not do this.
if ($matched eq "%") {
print $outline."\n";
next LINE;
}
} # SPECIAL
print $outline.$rest.$endline."\n";
if ($endline =~ /<\/code>/) {
$tt = 0;
}
$endline ="";
} # LINE
}
sub metaquote {
my $name = quotemeta $_[0];
$name =~ s/\\ /\\s+/g;
return $name;
}
sub startfile {
my $sec = $_[0];
my ($num, $name, $re, $fname, $name1, $name2);
if ($sec->{secnum} == 0) {
$sec->{chapnum} = $chap->{number};
$num = $chap->{number};
$name = $chap->{name};
$name1 = metaquote $name;
$re = "^\\\\(Chapter|PreliminaryChapter)\\{$name1\\}";
} else {
$num = $sec->{chapnum} . "." .$sec->{secnum};
$name = $sec->{name};
$name1 = metaquote $name;
$re = "^\\\\Section\\{$name1\\}";
}
$name2 = kanonize $name;
$fname = htm_fname($opt_c,
$sec->{chapnum}, $sec->{secnum}, $sec->{ssecnum});
open ( OUT, ">${odir}${fname}" ) || die "Can't write to ${odir}${fname}";
select OUT;
print "<html><head><title>[$book] $num $name2</title></head>\n";
print "<body text=\"\#000000\" bgcolor=\"\#ffffff\">\n";
add_to_index($fname, $name, $sec);
navigation( ($opt_c) ? $chap->{sections}[0] : $sec );
print "<h1>$num $name2</h1><p>\n";
return ($fname, $re);
}
sub startsec {
my $sec = $_[0];
my $snum = $sec->{secnum};
my $name = $sec->{name};
add_to_index(htm_fname($opt_c, $sec->{chapnum}, $snum, 0), $name, $sec);
my $num = $sec->{chapnum} . "." .$snum;
$snum = "0" x (3 - length $snum) . $snum;
my $name1 = metaquote $name;
my $name2 = kanonize $name;
print "<h2><a name=\"SECT$snum\">$num $name2</a></h2>\n<p>";
return "^\\\\Section\\{$name1\\}";
}
sub sectionlist {
my $chap = $_[0];
my $sec;
print "<P>\n<H3>Sections</H3>\n<oL>\n";
SUBSEC: for $sec (@{$chap->{sections}}) {
next SUBSEC if ($sec->{secnum} == 0);
my $link = htm_fname($opt_c, $sec->{chapnum}, $sec->{secnum}, 0);
my $name2 = kanonize $sec->{name};
print "<li> <A HREF=\"$link\">$name2</a>\n";
}
print "</ol><p>\n";
}
#
# Basically the chapter file is read in one pass, using information previously
# read from the .toc file to fill in next and previous pointers and the like
#
sub navigation {
my $sec = $_[0];
my $chap = $sec->{chapter};
my $cfname = htm_fname($opt_c, $sec->{chapnum}, 0, 0);
if ($mainman == 1) {
print "[<a href=\"../index.htm\">Top</a>] "
} else {
if ($opt_f) {
print "[<a href=\"$opt_f\">Top</a>] "
}
};
if ($sec->{secnum} == 0) {
print "[<a href = \"chapters.htm\">Up</a>] ";
if (tonum($chap->{number}) != 1) {
my $prev = htm_fname($opt_c,
$chapters[tonum($chap->{number}) - 1]{number},
0, 0);
print "[<a href =\"$prev\">Previous</a>] ";
}
if (tonum($chap->{number}) != $#chapters) {
my $next = htm_fname($opt_c,
$chapters[tonum($chap->{number}) + 1]{number},
0, 0);
print "[<a href =\"$next\">Next</a>] ";
}
} else {
print "[<a href = \"$cfname\">Up</a>] ";
if ($sec->{secnum} != 1) {
my $prev = htm_fname($opt_c, $chap->{number}, $sec->{secnum} - 1,
0);
print "[<a href =\"$prev\">Previous</a>] ";
}
if ($sec->{secnum} != $#{$chap->{sections}}) {
my $next = htm_fname($opt_c, $chap->{number}, $sec->{secnum} + 1,
0);
print "[<a href =\"$next\">Next</a>] ";
} elsif (tonum($chap->{number}) != $#chapters) {
my $next = htm_fname($opt_c,
$chapters[tonum($chap->{number}) + 1]{number},
0, 0);
print "[<a href =\"$next\">Next</a>] ";
}
}
print "[<a href = \"theindex.htm\">Index</a>]\n";
}
sub convert_chap {
my ($chap) = @_;
my ($re, $startre, $fname, $secline);
$indexcount = 0;
open (IN, "<$dir$chap->{file}.tex")
|| die "Can't read $dir$chap->{file}.tex";
$_ = <IN>;
# loop, controlled by the list of sections that we expect
# will fail, possibly messily if this does not match reality
# The call to startfile produces navigation + a chapter heading
if ($opt_c) { # each chapter in a single file
($fname,$re) = startfile $chap->{sections}[0];
}
# note we *need* $sec to act globally in what follows!
SECT: for $sec (@{$chap->{sections}}) {
# sort out what we are processing (chapter or section)
# produce the header of the Web page
if ($opt_c) {
$re = startsec $sec unless ($sec->{secnum} == 0);
} else {
# The call to startfile produces navigation + a section heading
($fname, $re) = startfile $sec;
# print STDERR "fname: $fname, re: $re\n";
}
($startre = $re) =~ s/(^[^\{]*\{).*/$1/;
#
# Look for the \Chapter or \Section line
#
while ( !/$startre/ ) {
unless (defined($_ = <IN>)) {
die "Missing chapter or section line matching $startre" };
};
chomp;
$secline = $_;
while ( $secline !~ /\}/ ) {
unless (defined($_ = <IN>)) {
die "Missing chapter or section line matching $re" };
chomp;
s/\%.*//;
$secline .= " $_";
};
unless ($secline =~ /$re/) {
die "Missing chapter or section line matching $re"
};
# If this is the beginning of a chapter, we list its sections
if ($sec->{secnum} == 0) {
if (defined($chap->{sections}[1])) {
sectionlist $chap;
} else {
print STDERR "Warning: Chapter has no sections\n";
}
}
# Now we print the section body
convert_text($fname);
print "<p>\n";
# If it's one file per section ... add navigation etc. at end of file
unless ($opt_c) {
navigation $sec;
print $footer;
close OUT;
select STDOUT;
}
}
# If it's one file per chapter ... add navigation etc. at end of file
if ($opt_c) {
navigation $chap->{sections}[0];
print $footer;
close OUT;
select STDOUT;
}
close IN;
}
sub chapters_page {
open (OUT, ">${odir}chapters.htm")
|| die "Can't write to ${odir}chapters.htm";
select OUT;
print <<END
<html><head><title>$booktitle - Chapters</title></head>
<body text=\"\#000000\" bgcolor=\"\#ffffff\">
<h1>$booktitle_body - Chapters</h1>
<ol>
END
;
CHAP: foreach $chap (@chapters) {
unless (defined $chap) { next CHAP};
my $link = htm_fname($opt_c, $chap->{number}, 0, 0);
my $name2 = kanonize $chap->{name};
print "</ol><ol type=\"A\">\n" if ( $chap->{number} eq "A" );
print "<li><a href=\"$link\">$name2</a>\n";
}
print <<END
</ol><ul>
<li><a href=\"biblio.htm\">References</a>
<li><a href=\"theindex.htm\">Index</a>
</ul><p>
END
;
if ($mainman == 1) {
print "[<a href=\"../index.htm\">Top</a>]<p>"
} else {
if ($opt_f) {
print "[<a href=\"$opt_f\">Top</a>] "
}
};
print $footer;
close OUT;
select STDOUT;
# Touch the chapters file so that `make' recognizes the conversion
# has been done.
system "touch ${odir}chapters.htm";
}
sub caseless { lc($a) cmp lc ($b) or $a cmp $b }
sub index_head {
my ($letter, @letters) = @_;
my ($bstb);
print <<END
<html><head><title>$booktitle - Index ${letter}</title></head>
<body text=\"\#000000\" bgcolor=\"\#ffffff\">
<h1>$booktitle_body - Index ${letter}</h1>
<p>
END
;
# print STDERR $letter, @letters, "\n";
foreach $bstb (@letters) {
if ($opt_i) {
print "<a href=\"\#idx${bstb}\">$bstb</A>\n";
}
elsif ($bstb eq "_") {
print "<a href=\"theindex.htm\">$bstb</A>\n";
}
else {
print "<a href=\"indx${bstb}.htm\">$bstb</A>\n";
}
}
}
sub index_end {
print "</dl><p>\n";
if ($mainman == 1) {
print "[<a href=\"../index.htm\">Top</a>] "
} else {
if ($opt_f) {
print "[<a href=\"$opt_f\">Top</a>] "
}
};
print "[<a href=\"chapters.htm\">Up</a>]";
print "<p>\n$footer";
}
sub index_page {
my ($ent, $ref, $letter, $bstb, $thisletter, @entries, %letters, @letters);
%letters = $opt_i ? ()
: ("_" => ""); # With multiple indices, the "_"
# index is theindex.htm
foreach $ent (keys %index) {
$bstb = uc(substr($ent,0,1));
if ($bstb lt "A" or $bstb gt "Z") {$bstb = "_";}
$letters{$bstb} = "";
}
@letters = sort caseless keys %letters;
$letter = $opt_i ? "" : "_";
open (OUT, ">${odir}theindex.htm")
|| die "Can't write to ${odir}theindex.htm";
select OUT;
index_head($letter, @letters);
ENTRY: foreach $ent (sort caseless keys %index) {
$thisletter = uc(substr($ent,0,1));
if ($thisletter lt "A" or $thisletter gt "Z") {$thisletter = "_";}
if ($letter eq "") { # Only happens first time round for $opt_i
$letter = $thisletter;
print "<H2><A NAME=\"idx${letter}\">$letter</A></H2>\n<dl>\n";
}
elsif ($letter ne $thisletter) {
$letter = $thisletter;
if ($opt_i) {
print "</dl><p>\n";
print "<H2><A NAME=\"idx${letter}\">$letter</A></H2>\n<dl>\n";
}
else {
index_end;
close OUT;
select STDOUT;
open (OUT, ">${odir}indx${letter}.htm")
|| die "Can't write to ${odir}indx${letter}.htm";
select OUT;
index_head($letter, @letters);
}
}
$ent1 = $ent;
$ent1 =~ s/!/, /g;
$ent1 =~ s/[{}]//g;
print "<dt>".kanonize $ent1." ";
for $ref (@{$index{$ent}}) {
print "<a href=\"$ref->[0]\">$ref->[1]</a> ";
}
print "\n";
}
index_end;
close OUT;
select STDOUT;
}
sub biblio_page {
my $infile = "${dir}manual.bbl";
my $outfile = "${odir}biblio.htm";
my $macro;
open (OUT, ">${outfile}") || die "Can't write to ${outfile}";
select OUT;
print <<END
<html><head><title>$booktitle - References</title></head>
<body text=\"\#000000\" bgcolor=\"\#ffffff\">
<h1>$booktitle_body - References</h1><dl>
END
;
if (-f $infile and -r $infile) {
open IN, "<$infile";
my ($brace,$embrace) = (0,-1);
while (<IN>) {
chomp;
my $outline = "";
if (/newcommand/ || /thebibliography/) { }
elsif (/^\\bibitem\[[^\]]+\]\{([^\}]+)\}/) {
print "<dt><a name=\"$1\"><b>[$1]</b></a><dd>\n";
} else {
my $line = $_;
if ($line =~ /^\s*\\newblock/) { $outline .= "<br>";
$line = $'; }
while ($line =~ /[\${}<>~&\\]/) {
$outline .= $`;
$matched = $&;
$line = $';
if ($opt_t and $matched eq "\$" and $line =~ /([^\$]*\$)/) {
# if we are using the -t option and we have
# detected a *simple* maths formula $...$ pass it
# off directly to tth_math_replace. Bibliographies
# should only have very simple maths formulae. If
# it's broken over a line, we won't detect it.
$matched .= $&;
$outline .= tth_math_replace($matched);
$line = $';
} elsif ($matched eq "\{") {
if ($line =~ /^\\(em|it)\s*/) { $embrace = $brace;
$outline .= "<em>";
$line = $'; }
$brace++;
} elsif ($matched eq "\}") {
$brace--;
if ($brace == -1 ) {
die "Unbalanced braces in bbl file ".
"($outline$matched$line";
} elsif ($brace == $embrace) { $outline .= "</em>";
$embrace = -1; }
} elsif ($matched eq "\\") {
if ($line =~ /^cite\{([^\}]*)\}/) {
$outline .= "<a href=\"#$1\"><cite>$1</cite></a>";
$line = $';
} else {
($line, $macro) = macro_replace($line);
$outline .= $macro;
}
} elsif ($matched eq "~" ) {
$outline .= "&nbsp;";
} elsif ($matched ne "\$") {
$outline .= html_literal $matched;
}
}
print "$outline$line\n";
}
}
} else {
print STDERR "Warning: did not find a .bbl file ... ok?\n";
}
print "</dl><p>\n";
if ($mainman == 1) {
print "[<a href=\"../index.htm\">Top</a>] "
} else {
if ($opt_f) {
print "[<a href=\"$opt_f\">Top</a>] "
}
};
print "[<a href=\"chapters.htm\">Up</a>]";
print "<p>\n$footer\n";
close OUT;
select STDOUT;
}
#
# Main program starts here
#
# Process option and sort out input and output directories
#
getopts('csitun:f:');
if (!$opt_c) {$opt_c = 0;} # just to ensure it is not empty
chomp($dir = shift @ARGV);
if (substr($dir,0,1) ne "/") {
$dir = `pwd` . "/" . $dir;
$dir =~ s/\n//;
}
if (substr($dir,-1) ne "/") {
$dir .= "/";
}
unless (-d $dir and -r $dir) {
die "Can't use input directory $dir";
}
if ($opt_t) {
my ($whichtth) = `which tth`;
chomp($whichtth);
if ($whichtth !~ m+/tth$+) {
print STDERR "!! tth: not in path.\n$whichtth\n",
"... Maths formulae will vanish!",
" Install tth or avoid -t option.\n";
}
$tthbin="tth";
}
if ($opt_u) {
my ($whichtth) = `which tth`;
chomp($whichtth);
if ($whichtth !~ m+/tth$+) {
print STDERR "!! tth: not in path.\n$whichtth\n",
"... Maths formulae will vanish!",
" Install tth or avoid -t option.\n";
}
$tthbin="tth -u1";
}
if ($opt_n) {
# get book title
$book=$opt_n;
#$booktitle = "$opt_n : a GAP example";
$booktitle = "$opt_n : a GAP 4 package";
$booktitle_body = booktitle_body($booktitle, ("GAP", $opt_n));
$mainman=0;
$footer = "<P>\n<address>$opt_n manual<br>" .
`date +"%B %Y"` . "</address></body></html>";
#print "c: $opt_c \n";
} else {
if ($opt_f) {
die "option -f can only be used together with -n ";
}
if ($dir =~ /\/([^\/]+)\/$/) {
$book = $1;
} else {
die "Can't find basename of $dir";
}
if ($book eq "tut") {
$booktitle = "The GAP 4 Tutorial";
} elsif ($book eq "ref") {
$booktitle = "The GAP 4 Reference Manual";
} elsif ($book eq "prg") {
$booktitle = "The GAP 4 Programming Tutorial";
} elsif ($book eq "ext") {
$booktitle = "The GAP 4 Programming Reference Manual";
} elsif ($book eq "new") {
$booktitle = "GAP 4: New Features for Developers";
} else {
die "Invalid book, must be tut, ref, prg, new or ext";
}
$booktitle_body = booktitle_body($booktitle, "GAP");
$mainman=1;
}
if ($#ARGV != -1) {
chomp($odir=shift @ARGV);
} else {
$odir = "";
}
if (substr($odir,0,1) ne "/") {
$odir = `pwd` . "/" . $odir;
$odir =~ s/\n//;
}
if (substr($odir,-1) ne "/") {
$odir .= "/";
}
unless (-d $odir and -w $odir) {
die "Can't use output directory $odir";
}
print "Reading input from $dir\n" unless ($opt_s);
print "Creating output in $odir\n" unless ($opt_s);
if ($opt_t || $opt_u) {
# create macro file for our expressions and macros not known to tth in TeX
# mode.
$opt_t = tth_version;
print STDERR "Using TtH $opt_t to translate maths formulae.\n";
$opt_t =~ s/Version //;
open (TTHIN, ">tthmacros.tex") || die "Can't create tthmacros.tex";
print TTHIN "\\def\\Q{{\\bf Q}}\\def\\Z{{\\bf Z}}\\def\\N{{\\bf N}}\n",
"\\def\\R{{\\bf R}}\\def\\F{{\\bf F}}\n";
# \R and \I are used in the last chapter of ext
print TTHIN "\\def\\calR{{\\cal R}}\\def\\I{{\\cal I}}\n",
"\\def\\frac#1#2{{{#1}\\over{#2}}}\\def\\colon{:}\n",
"\\def\\longmapsto{\\mapsto}\\def\\lneqq{<}\n",
"\\def\\hookrightarrow{\\rightarrow}\n";
if ($opt_t < 2.52) {
# We work-around most of the deficiencies of versions of TtH
# prior to Version 2.52 ... but can't easily fix the lack of
# proper treatment of \not.
print STDERR
"Your version of TtH does not know many TeX commands.\n",
"It is recommended that you upgrade to the latest version from\n",
" http://hutchinson.belmont.ma.us/tth/tth-noncom/download.html\n";
print TTHIN "\\def\\mid{ | }\\def\\lbrack{[}\\def\\rbrack{]}\n",
"\\def\\gets{\\leftarrow}\\def\\land{\\wedge}\n";
}
close TTHIN;
}
getchaps;
print "Processed TOC files\n" unless ($opt_s);
open (TEX, "<${dir}manual.tex") || die "Can't open ${dir}manual.tex";
getlabs $dir;
while (<TEX>) {
if (/\\UseReferences{([^}]*)}/) {
getlabs "$dir$1/";
} elsif (/\\UseGapDocReferences{([^}]*)}/) {
getlabs "$dir$1/";
($gapdocbook = $1) =~ s?.*/([^/]*)/doc?$1?;
$gapdocbooks{$gapdocbook} = 1;
print STDERR "GapDoc books: ", keys(%gapdocbooks), "\n";
} elsif (/\\Package{([^}]*)}/) {
$sharepkg .= "|$1";
}
}
print "Processed LAB files\n" unless ($opt_s);
#
# OK go to work
#
CHAP: foreach $chap (@chapters) {
unless (defined $chap) {
next CHAP;
}
print "$chap->{number}. $chap->{name} ... $chap->{file}.tex\n"
unless ($opt_s);
convert_chap $chap;
}
print "and the chapters page\n" unless ($opt_s);
chapters_page;
print "and the index pages\n" unless ($opt_s);
index_page;
print "and the references\n" unless ($opt_s);
biblio_page;
if ($opt_t || $opt_u ) {
# remove the tth stuff
unlink 'tthin','tthout','tthmacros.tex';
}
print "done\n" unless ($opt_s);
#############################################################################
Reference in New Issue Copy Permalink