Move edge codes to their own file

edgecodes.py

@@ -0,0 +1,33 @@
+# Insert the correct edge codes here
+
+edgecode[ 0] = 'XX';
+edgecode[ 1] = 'XX';
+edgecode[ 2] = 'XX';
+edgecode[ 3] = 'XX';
+edgecode[ 4] = 'XX';
+edgecode[ 5] = 'XX';
+edgecode[ 6] = 'XX';
+edgecode[ 7] = 'XX';
+edgecode[ 8] = 'XX';
+edgecode[ 9] = 'XX';
+edgecode[10] = 'XX';
+edgecode[11] = 'XX';
+edgecode[12] = 'XX';
+edgecode[13] = 'XX';
+edgecode[14] = 'XX';
+edgecode[15] = 'XX';
+edgecode[16] = 'XX';
+edgecode[17] = 'XX';
+edgecode[18] = 'XX';
+edgecode[19] = 'XX';
+edgecode[20] = 'XX';
+edgecode[21] = 'XX';
+edgecode[22] = 'XX';
+edgecode[23] = 'XX';
+edgecode[24] = 'XX';
+edgecode[25] = 'XX';
+edgecode[26] = 'XX';
+edgecode[27] = 'XX';
+edgecode[28] = 'XX';
+edgecode[29] = 'XX';
+

firestar.py

@@ -1,45 +1,14 @@
 #!/usr/bin/python3
 from phue import Bridge
 import time
-b = Bridge('172.18.152.190')
+b = Bridge('172.18.130.12')
 Nedges = 30;
 edgecode = [None] * Nedges;
 
 # The edges are numbered as in info/SSDedges.obj; enter the two-letter code for
 # the lightstrip inserted through each edge in the block below:
 
-edgecode[ 0] = 'XX';
-edgecode[ 1] = 'XX';
-edgecode[ 2] = 'XX';
-edgecode[ 3] = 'XX';
-edgecode[ 4] = 'XX';
-edgecode[ 5] = 'XX';
-edgecode[ 6] = 'XX';
-edgecode[ 7] = 'XX';
-edgecode[ 8] = 'XX';
-edgecode[ 9] = 'XX';
-edgecode[10] = 'XX';
-edgecode[11] = 'XX';
-edgecode[12] = 'XX';
-edgecode[13] = 'XX';
-edgecode[14] = 'XX';
-edgecode[15] = 'XX';
-edgecode[16] = 'XX';
-edgecode[17] = 'XX';
-edgecode[18] = 'XX';
-edgecode[19] = 'XX';
-edgecode[20] = 'XX';
-edgecode[21] = 'XX';
-edgecode[22] = 'XX';
-edgecode[23] = 'XX';
-edgecode[24] = 'XX';
-edgecode[25] = 'XX';
-edgecode[26] = 'XX';
-edgecode[27] = 'XX';
-edgecode[28] = 'XX';
-edgecode[29] = 'XX';
-
-# End of edge codes; show automation follows
+exec(open("edgecodes.py").read())
 
 edges = [ b[code] for code in edgecode ]