feat: Point coordinate regulators

Implements regulators for the Euclidean coordinates of Point entities,
  automatically creating all three of them for each added point entity. When
  such a regulator is set, it freezes the corresponding representation
  coordinate to the set point. In addition, if all three coordinates of a
  given Point are set, the coradius coordinate (which holds the norm of the
  point) is frozen as well.

  Note that a PointCoordinateRegulator must be created with a Point as the
  subject. This commit modifies HalfCurvatureRegulator analogously, so that
  it can only be created with a Sphere.

  A couple of prospective issues that should be filed in association with
  this commit:
  * The new coordinate regulators create redundant display information with
    the raw representation coordinates of a point that are already shown in
    the outline view.
  * The optimization status of these regulators together with HalfCurvature
    regulators (i.e., the ones implemented by freezing coordinates) is different
    from InversiveDistance regulators when an Assembly is unrealizable: the
    frozen-coordinate constraints will be "hard" in that they will be forced
    to precisely equal their set point, whereas the distance regulators are
    "soft" in that they can be relaxed from their set points in an effort to
    minimize the loss function of the configuration as compared to the values
    of the constraints. Perhaps at some point we should/will have a mechanism
    to specify the softness/hardness of constraints, but in the meantime,
    there should not be two different categories of constraints. Suppose we
    decide that by default that all constraints are soft. Then the optimizer
    should be able to search changing, for example, the radius of a
    curvature-constrained sphere, so as to minimize the loss function (for a
    loss that would therefore presumably have a term akin to the square of the
    difference between the specified and actual half-curvature of the sphere).
    For example, suppose you specify that the half-curvature of a sphere is 1
    (so it has radius 1/2) but that its distance to a point is -1. These
    constraints cannot be satisfied, so the optimization fails, presumably
    with the point at the sphere center, and the sphere with radius 1/2.
    So all of the loss is concentrated in the difference between the actual
    point-sphere distance being -1/2, not -1. It would be more appropriate
    (in the all-soft constraint regime) to end up at something like a sphere of
    half-curvature 1/√2 with the point at the center, so that the loss is split
    between both the half-curvature and the distance to the sphere being off by
    1 - 1/√2. (At a guess, that would minimize the sum of the squares of the
    two differences.)

app-proto/Cargo.lock

@@ -255,6 +255,7 @@ dependencies = [
  "charming",
  "console_error_panic_hook",
  "dyna3",
+ "enum-iterator",
  "itertools",
  "js-sys",
  "lazy_static",
@@ -271,6 +272,26 @@ version = "1.13.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "60b1af1c220855b6ceac025d3f6ecdd2b7c4894bfe9cd9bda4fbb4bc7c0d4cf0"
 
+[[package]]
+name = "enum-iterator"
+version = "2.3.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a4549325971814bda7a44061bf3fe7e487d447cba01e4220a4b454d630d7a016"
+dependencies = [
+ "enum-iterator-derive",
+]
+
+[[package]]
+name = "enum-iterator-derive"
+version = "1.5.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "685adfa4d6f3d765a26bc5dbc936577de9abf756c1feeb3089b01dd395034842"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "syn",
+]
+
 [[package]]
 name = "equivalent"
 version = "1.0.1"

app-proto/Cargo.toml

@@ -10,6 +10,7 @@ default = ["console_error_panic_hook"]
 dev = []
 
 [dependencies]
+enum-iterator = "2.3.0"
 itertools = "0.13.0"
 js-sys = "0.3.70"
 lazy_static = "1.5.0"

app-proto/src/assembly.rs

@@ -1,3 +1,4 @@
+use enum_iterator::{all, Sequence};
 use nalgebra::{DMatrix, DVector, DVectorView};
 use std::{
     cell::Cell,
@@ -26,6 +27,7 @@ use crate::{
         ConfigSubspace,
         ConstraintProblem,
         DescentHistory,
+        MatrixEntry,
         Realization,
     },
     specified::SpecifiedValue,
@@ -269,6 +271,7 @@ pub struct Point {
 
 impl Point {
     const WEIGHT_COMPONENT: usize = 3;
+    const NORM_COMPONENT: usize = 4;
     
     pub fn new(
         id: String,
@@ -302,6 +305,15 @@ impl Element for Point {
             point(0.0, 0.0, 0.0),
         )
     }
+
+    fn default_regulators(self: Rc<Self>) -> Vec<Rc<dyn Regulator>> {
+        all::<Axis>()
+            .map(|axis| {
+                Rc::new(PointCoordinateRegulator::new(self.clone(), axis))
+                    as Rc::<dyn Regulator>
+            })
+            .collect()
+    }
     
     fn id(&self) -> &String {
         &self.id
@@ -446,14 +458,14 @@ impl ProblemPoser for InversiveDistanceRegulator {
 }
 
 pub struct HalfCurvatureRegulator {
-    pub subject: Rc<dyn Element>,
+    pub subject: Rc<Sphere>,
     pub measurement: ReadSignal<f64>,
     pub set_point: Signal<SpecifiedValue>,
     serial: u64,
 }
 
 impl HalfCurvatureRegulator {
-    pub fn new(subject: Rc<dyn Element>) -> Self {
+    pub fn new(subject: Rc<Sphere>) -> Self {
         let measurement = subject.representation().map(
             |rep| rep[Sphere::CURVATURE_COMPONENT]
         );
@@ -498,6 +510,69 @@ impl ProblemPoser for HalfCurvatureRegulator {
     }
 }
 
+#[derive(Clone, Copy, Sequence)]
+pub enum Axis {X = 0, Y = 1, Z = 2}
+
+impl Axis {
+    pub const N_AXIS: usize = (Axis::Z as usize) + 1;
+    pub const NAME: [&str; Axis::N_AXIS] = ["X", "Y", "Z"];
+}
+
+pub struct PointCoordinateRegulator {
+    pub subject: Rc<Point>,
+    pub axis: Axis,
+    pub measurement: ReadSignal<f64>,
+    pub set_point: Signal<SpecifiedValue>,
+    serial: u64
+}
+
+impl PointCoordinateRegulator {
+    pub fn new(subject: Rc<Point>, axis: Axis) -> Self {
+        let measurement = subject.representation().map(
+            move |rep| rep[axis as usize]
+        );
+        let set_point = create_signal(SpecifiedValue::from_empty_spec());
+        Self { subject, axis, measurement, set_point, serial: Self::next_serial() }
+    }
+}
+
+impl Serial for PointCoordinateRegulator {
+    fn serial(&self) -> u64 { self.serial }
+}
+
+impl Regulator for PointCoordinateRegulator {
+    fn subjects(&self) -> Vec<Rc<dyn Element>> { vec![self.subject.clone()] }
+    fn measurement(&self) -> ReadSignal<f64> { self.measurement }
+    fn set_point(&self) -> Signal<SpecifiedValue> { self.set_point }
+}
+
+impl ProblemPoser for PointCoordinateRegulator {
+    fn pose(&self, problem: &mut ConstraintProblem) {
+        self.set_point.with_untracked(|set_pt| {
+            if let Some(val) = set_pt.value {
+                let col = self.subject.column_index().expect(
+                    "Subject must be indexed before point-coordinate regulator poses.");
+                problem.frozen.push(self.axis as usize, col, val);
+                // Check if all three coordinates have been frozen, and if so,
+                // freeze the coradius as well
+                let mut coords = [0.0; Axis::N_AXIS];
+                let mut nset: usize = 0;
+                for &MatrixEntry {index, value} in &(problem.frozen) {
+                    if index.1 == col && index.0 < Axis::N_AXIS {
+                        nset += 1;
+                        coords[index.0] = value
+                    }
+                }
+                if nset == Axis::N_AXIS {
+                    let [x, y, z] = coords;
+                    problem.frozen.push(
+                        Point::NORM_COMPONENT, col, point(x,y,z)[Point::NORM_COMPONENT]);
+                }
+            }
+        });
+    }
+}
+
 // the velocity is expressed in uniform coordinates
 pub struct ElementMotion<'a> {
     pub element: Rc<dyn Element>,

app-proto/src/components/outline.rs

@@ -6,9 +6,11 @@ use web_sys::{KeyboardEvent, MouseEvent, wasm_bindgen::JsCast};
 use crate::{
     AppState,
     assembly::{
+        Axis,
         Element,
         HalfCurvatureRegulator,
         InversiveDistanceRegulator,
+        PointCoordinateRegulator,
         Regulator,
     },
     specified::SpecifiedValue
@@ -119,6 +121,19 @@ impl OutlineItem for HalfCurvatureRegulator {
     }
 }
 
+impl OutlineItem for PointCoordinateRegulator {
+    fn outline_item(self: Rc<Self>, _element: &Rc<dyn Element>) -> View {
+        view! {
+            li(class = "regulator") {
+                div(class = "regulator-label") { (Axis::NAME[self.axis as usize]) }
+                div(class = "regulator-type") { "Coordinate" }
+                RegulatorInput(regulator = self)
+                div(class = "status")
+            }
+        }
+    }
+}
+
 // a list item that shows an element in an outline view of an assembly
 #[component(inline_props)]
 fn ElementOutlineItem(element: Rc<dyn Element>) -> View {

app-proto/src/engine.rs

@@ -46,14 +46,14 @@ pub fn project_sphere_to_normalized(rep: &mut DVector<f64>) {
 
 // normalize a point's representation vector by scaling
 pub fn project_point_to_normalized(rep: &mut DVector<f64>) {
-    rep.scale_mut(0.5 / rep[3]);
+    rep.scale_mut(0.5 / rep[3]); //FIXME: This 3 should be Point::WEIGHT_COMPONENT
 }
 
 // --- partial matrices ---
 
 pub struct MatrixEntry {
-    index: (usize, usize),
-    value: f64,
+    pub index: (usize, usize),
+    pub value: f64,
 }
 
 pub struct PartialMatrix(Vec<MatrixEntry>);