diff --git a/app-proto/src/add_remove.rs b/app-proto/src/add_remove.rs
index 1419b02..b95eec2 100644
--- a/app-proto/src/add_remove.rs
+++ b/app-proto/src/add_remove.rs
@@ -1,5 +1,5 @@
 use itertools::izip;
-use std::{f64::consts::FRAC_1_SQRT_2, rc::Rc};
+use std::{f64::consts::{FRAC_1_SQRT_2, PI}, rc::Rc};
 use nalgebra::Vector3;
 use sycamore::prelude::*;
 use web_sys::{console, wasm_bindgen::JsValue};
@@ -367,6 +367,116 @@ fn load_radius_ratio_assemb(assembly: &Assembly) {
     }
 }
 
+// to finish setting up the problem, fix the following curvatures:
+//   sun      1
+//   moon     5/3 = 1.666666666666666...
+//   chain1   2
+// a tiny `x` or `z` nudge of the outer sphere reliably prevents realization
+// failures before they happen, or resolves them after they happen. the result
+// depends sensitively on the translation direction, suggesting that realization
+// is failing because the engine is having trouble breaking a symmetry
+// /* TO DO */
+// the engine's performance on this problem is scale-dependent! with the current
+// initial conditions, realization fails for any order of imposing the remaining
+// curvature constraints. scaling everything up by a factor of ten, as done in
+// the original problem, makes realization succeed reliably. one potentially
+// relevant difference is that a lot of the numbers in the current initial
+// conditions are exactly representable as floats, unlike the analogous numbers
+// in the scaled-up problem. the inexact representations might break the
+// symmetry that's getting the engine stuck
+fn load_irisawa_hexlet_assemb(assembly: &Assembly) {
+    let index_range = 1..=6;
+    let colors = [
+        [1.00_f32, 0.00_f32, 0.25_f32],
+        [1.00_f32, 0.25_f32, 0.00_f32],
+        [0.75_f32, 0.75_f32, 0.00_f32],
+        [0.25_f32, 1.00_f32, 0.00_f32],
+        [0.00_f32, 0.25_f32, 1.00_f32],
+        [0.25_f32, 0.00_f32, 1.00_f32]
+    ].into_iter();
+    
+    // create the spheres
+    let spheres = [
+        Sphere::new(
+            "outer".to_string(),
+            "Outer".to_string(),
+            [0.5_f32, 0.5_f32, 0.5_f32],
+            engine::sphere(0.0, 0.0, 0.0, 1.5)
+        ),
+        Sphere::new(
+            "sun".to_string(),
+            "Sun".to_string(),
+            [0.75_f32, 0.75_f32, 0.75_f32],
+            engine::sphere(0.0, -0.75, 0.0, 0.75)
+        ),
+        Sphere::new(
+            "moon".to_string(),
+            "Moon".to_string(),
+            [0.25_f32, 0.25_f32, 0.25_f32],
+            engine::sphere(0.0, 0.75, 0.0, 0.75)
+        ),
+    ].into_iter().chain(
+        index_range.clone().zip(colors).map(
+            |(k, color)| {
+                let ang = (k as f64) * PI/3.0;
+                Sphere::new(
+                    format!("chain{k}"),
+                    format!("Chain {k}"),
+                    color,
+                    engine::sphere(1.0 * ang.sin(), 0.0, 1.0 * ang.cos(), 0.5)
+                )
+            }
+        )
+    );
+    for sphere in spheres {
+        let _ = assembly.try_insert_element(sphere);
+    }
+    
+    // put the outer sphere in ghost mode and fix its curvature
+    let outer = assembly.elements_by_id.with_untracked(
+        |elts_by_id| elts_by_id["outer"].clone()
+    );
+    outer.ghost().set(true);
+    let outer_curvature_regulator = outer.regulators().with_untracked(
+        |regs| regs.first().unwrap().clone()
+    );
+    outer_curvature_regulator.set_point().set(
+        SpecifiedValue::try_from((1.0 / 3.0).to_string()).unwrap()
+    );
+    
+    // impose the desired tangencies
+    let [outer, sun, moon] = ["outer", "sun", "moon"].map(
+        |id| assembly.elements_by_id.with_untracked(
+            |elts_by_id| elts_by_id[id].clone()
+        )
+    );
+    let chain = index_range.map(
+        |k| assembly.elements_by_id.with_untracked(
+            |elts_by_id| elts_by_id[&format!("chain{k}")].clone()
+        )
+    );
+    for (chain_sphere, chain_sphere_next) in chain.clone().zip(chain.cycle().skip(1)) {
+        for (other_sphere, inversive_distance) in [
+            (outer.clone(), "1"),
+            (sun.clone(), "-1"),
+            (moon.clone(), "-1"),
+            (chain_sphere_next.clone(), "-1")
+        ] {
+            let tangency = InversiveDistanceRegulator::new([chain_sphere.clone(), other_sphere]);
+            tangency.set_point.set(SpecifiedValue::try_from(inversive_distance.to_string()).unwrap());
+            assembly.insert_regulator(Rc::new(tangency));
+        }
+    }
+    
+    let outer_sun_tangency = InversiveDistanceRegulator::new([outer.clone(), sun]);
+    outer_sun_tangency.set_point.set(SpecifiedValue::try_from("1".to_string()).unwrap());
+    assembly.insert_regulator(Rc::new(outer_sun_tangency));
+    
+    let outer_moon_tangency = InversiveDistanceRegulator::new([outer.clone(), moon]);
+    outer_moon_tangency.set_point.set(SpecifiedValue::try_from("1".to_string()).unwrap());
+    assembly.insert_regulator(Rc::new(outer_moon_tangency));
+}
+
 #[component]
 pub fn AddRemove() -> View {
     /* DEBUG */
@@ -398,6 +508,7 @@ pub fn AddRemove() -> View {
                 "low-curv" => load_low_curv_assemb(assembly),
                 "pointed" => load_pointed_assemb(assembly),
                 "radius-ratio" => load_radius_ratio_assemb(assembly),
+                "irisawa-hexlet" => load_irisawa_hexlet_assemb(assembly),
                 _ => ()
             };
             
@@ -450,6 +561,7 @@ pub fn AddRemove() -> View {
                 option(value="low-curv") { "Low-curvature" }
                 option(value="pointed") { "Pointed" }
                 option(value="radius-ratio") { "Radius ratio" }
+                option(value="irisawa-hexlet") { "Irisawa hexlet" }
                 option(value="empty") { "Empty" }
             }
         }